Measurement systems for your PC via Ethernet or USB
Connect DEWETRON’s front-end systems to your computer via USB or Ethernet interface, to become a powerful data acquisition system. The systems are distributable and can be daisy-chained to a multi-channel measurement system. Every common sensor is supported by using our special MSI sensor adapters.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## New Features and most important bugfixes:
* TRIONet3 device support
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRION(3)-Power:
* TRION SUB-XV support added
* TRION3-SUB-8:
* TRION SUB-XV support added
## Known Limitations
* Only one ethernet port usable.
FRONTEND Firmware R6.7.1: Create new USB update stick
(01_FRONTEND_R6.7.1_Create_USB-stick.zip - 289.15 MB) md5: 6bc7e1ee6ef25ce45995d082f3f26fca
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Known Limitations
* Only one ethernet port usable.
FRONTEND Firmware R6.7.2: Create new USB update stick
(01_FRONTEND_R6.7.2_Create_USB-stick.zip - 291.81 MB) md5: 7663b9728feaf904107132edc8969994
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
FRONTEND Firmware R7.0.0: Create new USB update stick
(01_FRONTEND_R7.0.0_Create_USB-stick.zip - 295.43 MB) md5: ed3336b0a98d2ddfa8c3969523606b93
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Allow device network configuration even if ip settings do not match
* Node default name is the serial number
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Allow device network configuration even if ip settings do not match
* Node default name is the serial number
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Allow device network configuration even if ip settings do not match
* Node default name is the serial number
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Known Limitations
* Only one ethernet port usable.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Fixed an issue when TRIONet device wre not shown after changing IP settings
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI higher sensor excitation power
- up to 1W for 24V setting
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
## Known Limitations
* Only one ethernet port usable.
FRONTEND Firmware R6.3.0: Update files for existing USB stick
(02_FRONTEND_R6.3.0_Update_existing_USB-stick.zip - 190.30 MB) md5: 5caa5a821cc3da3807ee5b9a2cfc2fc8
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Known Limitations
* Only one ethernet port usable.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Fixed an issue when TRIONet device wre not shown after changing IP settings
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI higher sensor excitation power
- up to 1W for 24V setting
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
## Known Limitations
* Only one ethernet port usable.
FRONTEND Firmware R6.6.0: Update files for existing USB stick
(02_FRONTEND_R6.6.0_Update_existing_USB-stick.zip - 253.65 MB) md5: 74db96a33fae27c653bc0f3b6efcd974
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## New Features and most important bugfixes:
* TRIONet3 device support
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRION(3)-Power:
* TRION SUB-XV support added
* TRION3-SUB-8:
* TRION SUB-XV support added
## Known Limitations
* Only one ethernet port usable.
FRONTEND Firmware R6.7.1: Update files for existing USB stick
(02_FRONTEND_R6.7.1_Update_existing_USB-stick.zip - 260.55 MB) md5: e0f13f738de7a571f5a4f2cd96b69309
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Known Limitations
* Only one ethernet port usable.
FRONTEND Firmware R6.7.2: Update files for existing USB stick
(02_FRONTEND_R6.7.2_Update_existing_USB-stick.zip - 263.21 MB) md5: bcd78e8bc86746f92fc81a89e151772c
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Known Limitations
* Only one ethernet port usable.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Fixed an issue when TRIONet device wre not shown after changing IP settings
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI higher sensor excitation power
- up to 1W for 24V setting
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
## Known Limitations
* Only one ethernet port usable.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## New Features and most important bugfixes:
* TRIONet3 device support
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRION(3)-Power:
* TRION SUB-XV support added
* TRION3-SUB-8:
* TRION SUB-XV support added
## Known Limitations
* Only one ethernet port usable.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Known Limitations
* Only one ethernet port usable.
## Description:
Software Release for selected DEWETRON DEWE3 enclosures allowing them
to operate like TRIONet devices including multiple frontends and TRION-SYNC.
Released for DEWE3-RMx and DEWE3-Mx.
## Requirements
* All FRONTEND devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.