Oxygen

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-10-29 Release Notice DEWETRON Oxygen R5.3.1 x64

* Components:
** DEWETRON Oxygen      R5.3.1   (5.3.1.56549)   (ed5059725981fcc70bbfe9e97e6c0b4994f505d2)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
** Power instrument
   - Fixed NaN displays in power instrument when opening a DMD
** XCP
   - Fixed a memory leak
** Oxygen SDK
   - QML Sandbox fixed reload

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON Oxygen R5.4.0 x64

* Components:
** DEWETRON Oxygen      R5.4.0   (5.4.0.57188)   (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Files:
** DEWETRON_Oxygen_Setup_R5.4.0_x64.exe
** DEWETRON_DMDReader_R5.4.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.4.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Offline POWER Analysis
   - Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
   - Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
   - Support for TRION-MIL (PMC-1553)
   - MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
   - Support of new TRION3 Board
   - Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
   - Show optional harmonic cursors in FFT
   - Switch between Hz and CPM x-Axis
** CAN Channel Picker
   - Option to show only active messages
** CAN DBC Parser
   - More advanced fault tolerance and error reporting
** New features in Python Framework for future use
   - User Input Dialog
** MSI2-600-V
   - Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON Oxygen R5.5.0 x64

* Components:
** DEWETRON Oxygen      R5.5.0   (5.5.0.58073)   (bc6087b8b913f97749715137b6b4f8073628c55f)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.0_x64.exe
** DEWETRON_DMDReader_R5.5.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
   - Load external recorded Video (e.g. HS-Video) in Analysis Mode
   - Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
   - Create a screen capturing of the measurement screen
   - Select Framerate, Quality and Speed
** Setup Configuration Lock
   - Lock Configuration on Setup load to avoid manipulation
   - Select between different areas of lock
   - Unlock with Password
** Power Analysis
   - d/q Analysis for use with Synchronous Machines / BLDC
   - Harmonic Table view
** New Data Export Formats
   - NI Diadem DAT Export .dat
   - DynaWorks Neutral File .nt
** Additional SCPI Commands
   - Check Sync State
   - Create and modify header data
** Reworked Filename Composer
   - Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
   - Adjustable Line Width in Recorder and Spectrum Analyzer
   - Adaptive Linking of Recorders
   - Adjustment of X-Tick Labels in Recorder
   - Three size options for labels in Reporting pages
   - Resizable Sidebars
   - Recorder Mouse Label (activate in Recorder Settings)
   - Prompt Header after Measurement Stop
** Additional Features
   - h264 Encoder for Video
   - Bayer Data Format for GIGE-Camera (reduce data transfer)
   - Adjustable Playback Speed   
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
   - Plugins written with the OXYGEN SDK can now be used also offline
   - e.g. ARINC and MIL-STD Plugins or your own  
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON Oxygen R5.5.1 x64

* Components:
** DEWETRON Oxygen      R5.5.1   (5.5.1.58364)   (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.1_x64.exe
** DEWETRON_DMDReader_R5.5.1.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TRION3-AOUT-8
   - Added FileReplay support
** USB-Webcams
   - Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
   - Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
   - Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
   - Correctly visualize panel in overview
** Counter channels:
   - Enabled PulswWidth mode
** OXYGEN-NET
   - Fix for a potential crash when using custom file name patterns

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON Oxygen R5.6.0 x64

* Components:
** DEWETRON Oxygen      R5.6.0   (5.6.0.58865)   (4663542f6937dc4e564c56962ca6020fc595c639)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.0_x64.exe
** DEWETRON_DMDReader_R5.6.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TEDS Support:
   - Detection of IEEE 1451.4 compatible sensors (selection)
   - Apply of scaling and mode of measurement input
   - Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
   - Native Support of CPAD2/3 Modules
** ARXML support for CAN:
   - Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
   - Enable the user to manually select the TRIONet for measurement
   - Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
   - Use Numeric Header data in Formula
   - Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
   - Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
   - Kml-track data can be used  as
center, left or right boundary of lane
** Additional Improvements:
   - New Storing Option: Stop measurement after... additional to Pause
   - Increase Pre-Time and Freeze time up to 60 seconds
   - Manual (Recording)-Trigger via GUI or SCPI
   - File Name pattern, user defined counter offset
   - Formula Channels can now be also grouped
   - Navigate thru channel list with CTRL+PAGE UP/DOWN
   - Increased sensitivity of power flicker emission calculation

* Fixes:
   - Update of Graphic Framework to avoid screen flickering on intel graphics
   - CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
   - Error Message regarding Oversampling @ Setup loading
   - Problem with ACQ-Start with no channel Enabled on first DAQ Board

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON Oxygen R5.6.1 x64

* Components:
** DEWETRON Oxygen      R5.6.1   (5.6.1.58941)   (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed user scaling when loading setups using TRION-2402-V boards
   - Changed TRIONet claim default setting to "Auto claim USB"
   - Fixed modbus plugin dialog

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-16 Release Notice DEWETRON Oxygen R5.6.2 x64

* Components:
** DEWETRON Oxygen      R5.6.2   (5.6.2.59027)   (a87041cb4b6ea4c78f7222342120741f4a0f34c8)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.2_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed a crash when UI elements from plugins are drawn
   - Qt memory leak fix
   - Fixed high memory consumption of the video instrument
   - Fixed invalid formulas on async channels
   - Fixed a crash when loading a complex modbus setup

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-08-06 Release Notice DEWETRON Oxygen R5.6.3 x64

* Components:
** DEWETRON Oxygen      R5.6.3   (5.6.3.59316)   (40bbfc76f51fac3b39db5a242ca9aef796bdb0f0)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.3)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Power: improved accuracy of RMS value calculation
   - Matrix Sampler: fixed high memory usage
   - CPAD: fixed crash when accessing removed devices
   - Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
   - Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
     - Needs TRION API 5.6.3 or better
   - Added support for TRION3-1820-POWER

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-04 Release Notice DEWETRON Oxygen R5.1.1 x64

* Components:
** DEWETRON Oxygen      R5.1.1    (5.1.1.54768)   (89a86d505f09155520a64b46b36ba53cf2ef6b86)

* Files:
** DEWETRON_Oxygen_Setup_R5.1.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.1.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** CAN-FD
   - Set Samplepoint and advanced timing parameter

* Fixes:
** Common:
   - OXYGEN crashes when switching AI to CAN
** Export:
   - XLSX-Export have wrong output format (text instead of value)
** MSI:
   - MSI2-STG, no balance action possible on CB16
   - MSI2-STG, bridge factor missing in settings
** Intensity Diagram:
   - Scaling broken after changes of channel settings
** Spectrum Analyzer:
   - Phase channel is not rendered correctly
** Snapshot Channels:
   - Sporadic NaN values when using aggregation (e.g. AVG)
** TRION-POWER:
    - SUB-Modules have ranges with wrong scaling
** SCPI:
   - Command STORE:FILE:NAME not applicable
   - Command :NUM:DIMS? does not report the right sample dimension
** XCP:
   - Use of same Oxygen setup leads to different A2L-file
   - A2L-file contains non usable channels (e.g. Power Group Channel)
   - Connect/Disconnect sometimes lead to deadlock of Oxygen
   - adapt visible names in A2L for better compatiblity with CANoe
   - Improved stability

* Changes:
** Power:
   - channel's samplerate for mechanical power must be less or equal to U/I channels
** FFT:
   - FFT-Group channel (complex) is not stored by default

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-06-29 Release Notice DEWETRON Oxygen R5.2.0 x64

* Components:
** DEWETRON Oxygen      R5.2.0   (5.2.0.55324)   (7fdcd54fb5a17fbe813c830d08a6a86a89efe987)

* Files:
** DEWETRON_Oxygen_Setup_R5.2.0_x64.exe
** DEWETRON_DMDReader_R5.2.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.2.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** Channel-wise sample rate selector
   - Set individual sampling rates on the same board
   - Auto-Adjust of AAF
** Advanced storing modes
   - individual storing settings per channel
   - including skip mode for sample rate switch emulation
   - show "Statistics" data in all instruments
** Efficiency Map (Matrix Sampler)
   - Calculation Module for matrix sampling (X-Y -> Z)
   - used for efficiency map creation (matrix channel)
   - including interpolation in intensity diagram
   - requires OXY-OPT-POW-ADV
** Soundlevel Meter
   - Calculation module for sound level determination
   - A/B/C/D/Z frequency weighting
   - slow, fast, impulse time weighting
   - interval and continous mode
* Fixes:
** Export:
   - Fixed Acquisition Problems after AUTO-Export
   - Lower the MATLAB Compressed Export duration by 80%
   - MDF4: Export did not contain any data, if a CAN Message was selected
** CAN:
   - Fixed Problems with CAN-OUT at high data rate
   - DBC-Parser now can move on with DLC mismatch
   - J1939: Ignore priority and source address (if defined as 0xFE) in message id
** OXYGEN NET:
   - Fixed Memory increase in case of deactivating the statistics storage

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-09-30 Release Notice DEWETRON Oxygen R5.3.0 x64

* Components:
** DEWETRON Oxygen      R5.3.0   (5.3.0.56283)   (01fcfaaba866ff4a59419ac77422e4615eb95859)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.0_x64.exe
** DEWETRON_DMDReader_R5.3.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** ARINC-429 (Altadt)
   - Support for TRION-ARINC (PMC-429)
   - A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
   - Octave, third octave or twelfth octave band resolution according to EN61260
   - Amplitude or decibel spectrum
   - Array chart instrument
** Audio replay
   - Audio replay instrument
** FFT reference curves
   - available in spectrum analyzer
** New export formats
   - WAV export
   - RPCIII export
** Improved digital instrument
   - improved layout
   - configureable minimum digits and automatic unit prefix
** SCPI
   - Improved setup load (async)
** PUREC device support
   - Chassis visualization added
   - MSI displayed in channel overview
* Channel list
   - Width is now individually adjustable
* Settings:
   - New Amplifier / RS232 / RS485 page
   - Configure serial ports without a restart
* OXYGEN SDK
   - Export plugin extensions

* Fixes:
** Improved MATLAB export
   - Faster Compressed export
   - No interval split
** Improved EXPORT interface
   - Faster interface for 1000+ channels
** Improved CAN-OUT
   - Driver issues limit CAN-OUT to less than 700 messages per second
   - If this limit is exceeded, older messages get automatically dropped

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-09-30 Release Notice DEWETRON Oxygen R5.3.0 x64

* Components:
** DEWETRON Oxygen      R5.3.0   (5.3.0.56283)   (01fcfaaba866ff4a59419ac77422e4615eb95859)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.0_x64.exe
** DEWETRON_DMDReader_R5.3.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** ARINC-429 (Altadt)
   - Support for TRION-ARINC (PMC-429)
   - A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
   - Octave, third octave or twelfth octave band resolution according to EN61260
   - Amplitude or decibel spectrum
   - Array chart instrument
** Audio replay
   - Audio replay instrument
** FFT reference curves
   - available in spectrum analyzer
** New export formats
   - WAV export
   - RPCIII export
** Improved digital instrument
   - improved layout
   - configureable minimum digits and automatic unit prefix
** SCPI
   - Improved setup load (async)
** PUREC device support
   - Chassis visualization added
   - MSI displayed in channel overview
* Channel list
   - Width is now individually adjustable
* Settings:
   - New Amplifier / RS232 / RS485 page
   - Configure serial ports without a restart
* OXYGEN SDK
   - Export plugin extensions

* Fixes:
** Improved MATLAB export
   - Faster Compressed export
   - No interval split
** Improved EXPORT interface
   - Faster interface for 1000+ channels
** Improved CAN-OUT
   - Driver issues limit CAN-OUT to less than 700 messages per second
   - If this limit is exceeded, older messages get automatically dropped

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-10-29 Release Notice DEWETRON Oxygen R5.3.1 x64

* Components:
** DEWETRON Oxygen      R5.3.1   (5.3.1.56549)   (ed5059725981fcc70bbfe9e97e6c0b4994f505d2)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
** Power instrument
   - Fixed NaN displays in power instrument when opening a DMD
** XCP
   - Fixed a memory leak
** Oxygen SDK
   - QML Sandbox fixed reload

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON Oxygen R5.4.0 x64

* Components:
** DEWETRON Oxygen      R5.4.0   (5.4.0.57188)   (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Files:
** DEWETRON_Oxygen_Setup_R5.4.0_x64.exe
** DEWETRON_DMDReader_R5.4.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.4.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Offline POWER Analysis
   - Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
   - Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
   - Support for TRION-MIL (PMC-1553)
   - MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
   - Support of new TRION3 Board
   - Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
   - Show optional harmonic cursors in FFT
   - Switch between Hz and CPM x-Axis
** CAN Channel Picker
   - Option to show only active messages
** CAN DBC Parser
   - More advanced fault tolerance and error reporting
** New features in Python Framework for future use
   - User Input Dialog
** MSI2-600-V
   - Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON Oxygen R5.5.0 x64

* Components:
** DEWETRON Oxygen      R5.5.0   (5.5.0.58073)   (bc6087b8b913f97749715137b6b4f8073628c55f)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.0_x64.exe
** DEWETRON_DMDReader_R5.5.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
   - Load external recorded Video (e.g. HS-Video) in Analysis Mode
   - Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
   - Create a screen capturing of the measurement screen
   - Select Framerate, Quality and Speed
** Setup Configuration Lock
   - Lock Configuration on Setup load to avoid manipulation
   - Select between different areas of lock
   - Unlock with Password
** Power Analysis
   - d/q Analysis for use with Synchronous Machines / BLDC
   - Harmonic Table view
** New Data Export Formats
   - NI Diadem DAT Export .dat
   - DynaWorks Neutral File .nt
** Additional SCPI Commands
   - Check Sync State
   - Create and modify header data
** Reworked Filename Composer
   - Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
   - Adjustable Line Width in Recorder and Spectrum Analyzer
   - Adaptive Linking of Recorders
   - Adjustment of X-Tick Labels in Recorder
   - Three size options for labels in Reporting pages
   - Resizable Sidebars
   - Recorder Mouse Label (activate in Recorder Settings)
   - Prompt Header after Measurement Stop
** Additional Features
   - h264 Encoder for Video
   - Bayer Data Format for GIGE-Camera (reduce data transfer)
   - Adjustable Playback Speed   
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
   - Plugins written with the OXYGEN SDK can now be used also offline
   - e.g. ARINC and MIL-STD Plugins or your own  
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON Oxygen R5.5.1 x64

* Components:
** DEWETRON Oxygen      R5.5.1   (5.5.1.58364)   (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.1_x64.exe
** DEWETRON_DMDReader_R5.5.1.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TRION3-AOUT-8
   - Added FileReplay support
** USB-Webcams
   - Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
   - Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
   - Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
   - Correctly visualize panel in overview
** Counter channels:
   - Enabled PulswWidth mode
** OXYGEN-NET
   - Fix for a potential crash when using custom file name patterns

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON Oxygen R5.6.0 x64

* Components:
** DEWETRON Oxygen      R5.6.0   (5.6.0.58865)   (4663542f6937dc4e564c56962ca6020fc595c639)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.0_x64.exe
** DEWETRON_DMDReader_R5.6.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TEDS Support:
   - Detection of IEEE 1451.4 compatible sensors (selection)
   - Apply of scaling and mode of measurement input
   - Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
   - Native Support of CPAD2/3 Modules
** ARXML support for CAN:
   - Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
   - Enable the user to manually select the TRIONet for measurement
   - Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
   - Use Numeric Header data in Formula
   - Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
   - Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
   - Kml-track data can be used  as
center, left or right boundary of lane
** Additional Improvements:
   - New Storing Option: Stop measurement after... additional to Pause
   - Increase Pre-Time and Freeze time up to 60 seconds
   - Manual (Recording)-Trigger via GUI or SCPI
   - File Name pattern, user defined counter offset
   - Formula Channels can now be also grouped
   - Navigate thru channel list with CTRL+PAGE UP/DOWN
   - Increased sensitivity of power flicker emission calculation

* Fixes:
   - Update of Graphic Framework to avoid screen flickering on intel graphics
   - CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
   - Error Message regarding Oversampling @ Setup loading
   - Problem with ACQ-Start with no channel Enabled on first DAQ Board

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON Oxygen R5.6.1 x64

* Components:
** DEWETRON Oxygen      R5.6.1   (5.6.1.58941)   (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed user scaling when loading setups using TRION-2402-V boards
   - Changed TRIONet claim default setting to "Auto claim USB"
   - Fixed modbus plugin dialog

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-16 Release Notice DEWETRON Oxygen R5.6.2 x64

* Components:
** DEWETRON Oxygen      R5.6.2   (5.6.2.59027)   (a87041cb4b6ea4c78f7222342120741f4a0f34c8)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.2_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed a crash when UI elements from plugins are drawn
   - Qt memory leak fix
   - Fixed high memory consumption of the video instrument
   - Fixed invalid formulas on async channels
   - Fixed a crash when loading a complex modbus setup

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-08-06 Release Notice DEWETRON Oxygen R5.6.3 x64

* Components:
** DEWETRON Oxygen      R5.6.3   (5.6.3.59316)   (40bbfc76f51fac3b39db5a242ca9aef796bdb0f0)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.3)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Power: improved accuracy of RMS value calculation
   - Matrix Sampler: fixed high memory usage
   - CPAD: fixed crash when accessing removed devices
   - Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
   - Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
     - Needs TRION API 5.6.3 or better
   - Added support for TRION3-1820-POWER

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-05 Release Notice DEWETRON Oxygen R5.0.3 x64

* Components:
** DEWETRON Oxygen      R5.0.3    (5.0.3.54295)   (5cfbb19288f85929d38e68795382aca08c382fbe)

* Files:
** DEWETRON_Oxygen_Setup_R5.0.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.0.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* Fixes:
** GUI: Rendering of the channel mapping dialog took a long time.
** GUI: Cancelling the channel mapping dialog took a long time.
** GUI: Creation and adding a lot of channels to digital instruments was slow.
** Oxygen Net: High memory consumption on master and remote node.
** Oxygen Net: High cpu load with enabled gps channels.
** DAQP: DAQP modules could not be configured after loading a setup.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-30 Release Notice DEWETRON Oxygen R5.1.0 x64

* Components:
** DEWETRON Oxygen      R5.1.0    (5.1.0.54560)   (813c00d657afde62743a6ce131ae1608f2a8b4bc)

* Files:
** DEWETRON_Oxygen_Setup_R5.1.0_x64.exe
** DEWETRON_DMDReader_R5.1.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.1.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** Vector FlexRay support
   - Supports Fibex 2.0 to 4.1.2
   - Decoding to individual signals with offline support
   - Intuitive channel picker
** CAN-Offline decoding
   - Intuitive channel picker
** File Browser
   - Oxygen file browser is able to create new folders
   - Oxygen file browser is able to use standard file explorer ("Browse..." button)
** Filesplit by absolute time
   - Allows filesplits on rounded absolute time
** Array access in formula
   - Access single array elements
** OXYGEN Viewer
   - Review data files in parallel to a running Oxygen.
** Update of 6-Phase Calculation (Power)
   - Changed 6P6W schematic to 2x3P3W.
** Oxygen SDK
   - Improvements due to first reviews. More on GitHub (https://github.com/DEWETRON/OXYGEN-SDK)
** Oxygen GUI Improvements
   - Channel list: Unused channel groups are automatically folded
   - Channel list: Math formula editor now supports multiline edit
   - Channel list: Simple channel type filter
   - Improved tooltips
   - Cursors can now be renamed (A/B cursor)
   - Text instrument: Can display measurement time

* Fixes:
** Actions: Zero and Bridge Balance action on large systems
** Power:Crash with power group in special combinations with XCP
** Power: Crash when deleting power group on a special customer setup
** Trigger: Triggered recording: recording does not restart after resync
** Oxygen Net: High memory consumption when using Pause mode
** FFT: Fixed an invalid sign jump in the phase calculation
** EPAD/DAQP: Crash that may happens on module scans with invalid module addresses
** MSI: Fixed a scaling issue with MSI2-STG-5V, added missing Bridge Factor input field

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-06-29 Release Notice DEWETRON Oxygen R5.2.0 x64

* Components:
** DEWETRON Oxygen      R5.2.0   (5.2.0.55324)   (7fdcd54fb5a17fbe813c830d08a6a86a89efe987)

* Files:
** DEWETRON_Oxygen_Setup_R5.2.0_x64.exe
** DEWETRON_DMDReader_R5.2.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.2.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** Channel-wise sample rate selector
   - Set individual sampling rates on the same board
   - Auto-Adjust of AAF
** Advanced storing modes
   - individual storing settings per channel
   - including skip mode for sample rate switch emulation
   - show "Statistics" data in all instruments
** Efficiency Map (Matrix Sampler)
   - Calculation Module for matrix sampling (X-Y -> Z)
   - used for efficiency map creation (matrix channel)
   - including interpolation in intensity diagram
   - requires OXY-OPT-POW-ADV
** Soundlevel Meter
   - Calculation module for sound level determination
   - A/B/C/D/Z frequency weighting
   - slow, fast, impulse time weighting
   - interval and continous mode
* Fixes:
** Export:
   - Fixed Acquisition Problems after AUTO-Export
   - Lower the MATLAB Compressed Export duration by 80%
   - MDF4: Export did not contain any data, if a CAN Message was selected
** CAN:
   - Fixed Problems with CAN-OUT at high data rate
   - DBC-Parser now can move on with DLC mismatch
   - J1939: Ignore priority and source address (if defined as 0xFE) in message id
** OXYGEN NET:
   - Fixed Memory increase in case of deactivating the statistics storage

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-09-30 Release Notice DEWETRON Oxygen R5.3.0 x64

* Components:
** DEWETRON Oxygen      R5.3.0   (5.3.0.56283)   (01fcfaaba866ff4a59419ac77422e4615eb95859)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.0_x64.exe
** DEWETRON_DMDReader_R5.3.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** ARINC-429 (Altadt)
   - Support for TRION-ARINC (PMC-429)
   - A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
   - Octave, third octave or twelfth octave band resolution according to EN61260
   - Amplitude or decibel spectrum
   - Array chart instrument
** Audio replay
   - Audio replay instrument
** FFT reference curves
   - available in spectrum analyzer
** New export formats
   - WAV export
   - RPCIII export
** Improved digital instrument
   - improved layout
   - configureable minimum digits and automatic unit prefix
** SCPI
   - Improved setup load (async)
** PUREC device support
   - Chassis visualization added
   - MSI displayed in channel overview
* Channel list
   - Width is now individually adjustable
* Settings:
   - New Amplifier / RS232 / RS485 page
   - Configure serial ports without a restart
* OXYGEN SDK
   - Export plugin extensions

* Fixes:
** Improved MATLAB export
   - Faster Compressed export
   - No interval split
** Improved EXPORT interface
   - Faster interface for 1000+ channels
** Improved CAN-OUT
   - Driver issues limit CAN-OUT to less than 700 messages per second
   - If this limit is exceeded, older messages get automatically dropped

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-10-29 Release Notice DEWETRON Oxygen R5.3.1 x64

* Components:
** DEWETRON Oxygen      R5.3.1   (5.3.1.56549)   (ed5059725981fcc70bbfe9e97e6c0b4994f505d2)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
** Power instrument
   - Fixed NaN displays in power instrument when opening a DMD
** XCP
   - Fixed a memory leak
** Oxygen SDK
   - QML Sandbox fixed reload

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON Oxygen R5.4.0 x64

* Components:
** DEWETRON Oxygen      R5.4.0   (5.4.0.57188)   (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Files:
** DEWETRON_Oxygen_Setup_R5.4.0_x64.exe
** DEWETRON_DMDReader_R5.4.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.4.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Offline POWER Analysis
   - Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
   - Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
   - Support for TRION-MIL (PMC-1553)
   - MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
   - Support of new TRION3 Board
   - Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
   - Show optional harmonic cursors in FFT
   - Switch between Hz and CPM x-Axis
** CAN Channel Picker
   - Option to show only active messages
** CAN DBC Parser
   - More advanced fault tolerance and error reporting
** New features in Python Framework for future use
   - User Input Dialog
** MSI2-600-V
   - Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON Oxygen R5.5.0 x64

* Components:
** DEWETRON Oxygen      R5.5.0   (5.5.0.58073)   (bc6087b8b913f97749715137b6b4f8073628c55f)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.0_x64.exe
** DEWETRON_DMDReader_R5.5.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
   - Load external recorded Video (e.g. HS-Video) in Analysis Mode
   - Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
   - Create a screen capturing of the measurement screen
   - Select Framerate, Quality and Speed
** Setup Configuration Lock
   - Lock Configuration on Setup load to avoid manipulation
   - Select between different areas of lock
   - Unlock with Password
** Power Analysis
   - d/q Analysis for use with Synchronous Machines / BLDC
   - Harmonic Table view
** New Data Export Formats
   - NI Diadem DAT Export .dat
   - DynaWorks Neutral File .nt
** Additional SCPI Commands
   - Check Sync State
   - Create and modify header data
** Reworked Filename Composer
   - Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
   - Adjustable Line Width in Recorder and Spectrum Analyzer
   - Adaptive Linking of Recorders
   - Adjustment of X-Tick Labels in Recorder
   - Three size options for labels in Reporting pages
   - Resizable Sidebars
   - Recorder Mouse Label (activate in Recorder Settings)
   - Prompt Header after Measurement Stop
** Additional Features
   - h264 Encoder for Video
   - Bayer Data Format for GIGE-Camera (reduce data transfer)
   - Adjustable Playback Speed   
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
   - Plugins written with the OXYGEN SDK can now be used also offline
   - e.g. ARINC and MIL-STD Plugins or your own  
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON Oxygen R5.5.1 x64

* Components:
** DEWETRON Oxygen      R5.5.1   (5.5.1.58364)   (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.1_x64.exe
** DEWETRON_DMDReader_R5.5.1.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TRION3-AOUT-8
   - Added FileReplay support
** USB-Webcams
   - Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
   - Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
   - Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
   - Correctly visualize panel in overview
** Counter channels:
   - Enabled PulswWidth mode
** OXYGEN-NET
   - Fix for a potential crash when using custom file name patterns

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON Oxygen R5.6.0 x64

* Components:
** DEWETRON Oxygen      R5.6.0   (5.6.0.58865)   (4663542f6937dc4e564c56962ca6020fc595c639)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.0_x64.exe
** DEWETRON_DMDReader_R5.6.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TEDS Support:
   - Detection of IEEE 1451.4 compatible sensors (selection)
   - Apply of scaling and mode of measurement input
   - Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
   - Native Support of CPAD2/3 Modules
** ARXML support for CAN:
   - Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
   - Enable the user to manually select the TRIONet for measurement
   - Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
   - Use Numeric Header data in Formula
   - Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
   - Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
   - Kml-track data can be used  as
center, left or right boundary of lane
** Additional Improvements:
   - New Storing Option: Stop measurement after... additional to Pause
   - Increase Pre-Time and Freeze time up to 60 seconds
   - Manual (Recording)-Trigger via GUI or SCPI
   - File Name pattern, user defined counter offset
   - Formula Channels can now be also grouped
   - Navigate thru channel list with CTRL+PAGE UP/DOWN
   - Increased sensitivity of power flicker emission calculation

* Fixes:
   - Update of Graphic Framework to avoid screen flickering on intel graphics
   - CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
   - Error Message regarding Oversampling @ Setup loading
   - Problem with ACQ-Start with no channel Enabled on first DAQ Board

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON Oxygen R5.6.1 x64

* Components:
** DEWETRON Oxygen      R5.6.1   (5.6.1.58941)   (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed user scaling when loading setups using TRION-2402-V boards
   - Changed TRIONet claim default setting to "Auto claim USB"
   - Fixed modbus plugin dialog

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-16 Release Notice DEWETRON Oxygen R5.6.2 x64

* Components:
** DEWETRON Oxygen      R5.6.2   (5.6.2.59027)   (a87041cb4b6ea4c78f7222342120741f4a0f34c8)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.2_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed a crash when UI elements from plugins are drawn
   - Qt memory leak fix
   - Fixed high memory consumption of the video instrument
   - Fixed invalid formulas on async channels
   - Fixed a crash when loading a complex modbus setup

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-08-06 Release Notice DEWETRON Oxygen R5.6.3 x64

* Components:
** DEWETRON Oxygen      R5.6.3   (5.6.3.59316)   (40bbfc76f51fac3b39db5a242ca9aef796bdb0f0)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.3)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Power: improved accuracy of RMS value calculation
   - Matrix Sampler: fixed high memory usage
   - CPAD: fixed crash when accessing removed devices
   - Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
   - Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
     - Needs TRION API 5.6.3 or better
   - Added support for TRION3-1820-POWER

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-05 Release Notice DEWETRON Oxygen R5.0.3 x64

* Components:
** DEWETRON Oxygen      R5.0.3    (5.0.3.54295)   (5cfbb19288f85929d38e68795382aca08c382fbe)

* Files:
** DEWETRON_Oxygen_Setup_R5.0.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.0.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* Fixes:
** GUI: Rendering of the channel mapping dialog took a long time.
** GUI: Cancelling the channel mapping dialog took a long time.
** GUI: Creation and adding a lot of channels to digital instruments was slow.
** Oxygen Net: High memory consumption on master and remote node.
** Oxygen Net: High cpu load with enabled gps channels.
** DAQP: DAQP modules could not be configured after loading a setup.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-30 Release Notice DEWETRON Oxygen R5.1.0 x64

* Components:
** DEWETRON Oxygen      R5.1.0    (5.1.0.54560)   (813c00d657afde62743a6ce131ae1608f2a8b4bc)

* Files:
** DEWETRON_Oxygen_Setup_R5.1.0_x64.exe
** DEWETRON_DMDReader_R5.1.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.1.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** Vector FlexRay support
   - Supports Fibex 2.0 to 4.1.2
   - Decoding to individual signals with offline support
   - Intuitive channel picker
** CAN-Offline decoding
   - Intuitive channel picker
** File Browser
   - Oxygen file browser is able to create new folders
   - Oxygen file browser is able to use standard file explorer ("Browse..." button)
** Filesplit by absolute time
   - Allows filesplits on rounded absolute time
** Array access in formula
   - Access single array elements
** OXYGEN Viewer
   - Review data files in parallel to a running Oxygen.
** Update of 6-Phase Calculation (Power)
   - Changed 6P6W schematic to 2x3P3W.
** Oxygen SDK
   - Improvements due to first reviews. More on GitHub (https://github.com/DEWETRON/OXYGEN-SDK)
** Oxygen GUI Improvements
   - Channel list: Unused channel groups are automatically folded
   - Channel list: Math formula editor now supports multiline edit
   - Channel list: Simple channel type filter
   - Improved tooltips
   - Cursors can now be renamed (A/B cursor)
   - Text instrument: Can display measurement time

* Fixes:
** Actions: Zero and Bridge Balance action on large systems
** Power:Crash with power group in special combinations with XCP
** Power: Crash when deleting power group on a special customer setup
** Trigger: Triggered recording: recording does not restart after resync
** Oxygen Net: High memory consumption when using Pause mode
** FFT: Fixed an invalid sign jump in the phase calculation
** EPAD/DAQP: Crash that may happens on module scans with invalid module addresses
** MSI: Fixed a scaling issue with MSI2-STG-5V, added missing Bridge Factor input field

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-06-29 Release Notice DEWETRON Oxygen R5.2.0 x64

* Components:
** DEWETRON Oxygen      R5.2.0   (5.2.0.55324)   (7fdcd54fb5a17fbe813c830d08a6a86a89efe987)

* Files:
** DEWETRON_Oxygen_Setup_R5.2.0_x64.exe
** DEWETRON_DMDReader_R5.2.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.2.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** Channel-wise sample rate selector
   - Set individual sampling rates on the same board
   - Auto-Adjust of AAF
** Advanced storing modes
   - individual storing settings per channel
   - including skip mode for sample rate switch emulation
   - show "Statistics" data in all instruments
** Efficiency Map (Matrix Sampler)
   - Calculation Module for matrix sampling (X-Y -> Z)
   - used for efficiency map creation (matrix channel)
   - including interpolation in intensity diagram
   - requires OXY-OPT-POW-ADV
** Soundlevel Meter
   - Calculation module for sound level determination
   - A/B/C/D/Z frequency weighting
   - slow, fast, impulse time weighting
   - interval and continous mode
* Fixes:
** Export:
   - Fixed Acquisition Problems after AUTO-Export
   - Lower the MATLAB Compressed Export duration by 80%
   - MDF4: Export did not contain any data, if a CAN Message was selected
** CAN:
   - Fixed Problems with CAN-OUT at high data rate
   - DBC-Parser now can move on with DLC mismatch
   - J1939: Ignore priority and source address (if defined as 0xFE) in message id
** OXYGEN NET:
   - Fixed Memory increase in case of deactivating the statistics storage

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-09-30 Release Notice DEWETRON Oxygen R5.3.0 x64

* Components:
** DEWETRON Oxygen      R5.3.0   (5.3.0.56283)   (01fcfaaba866ff4a59419ac77422e4615eb95859)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.0_x64.exe
** DEWETRON_DMDReader_R5.3.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** ARINC-429 (Altadt)
   - Support for TRION-ARINC (PMC-429)
   - A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
   - Octave, third octave or twelfth octave band resolution according to EN61260
   - Amplitude or decibel spectrum
   - Array chart instrument
** Audio replay
   - Audio replay instrument
** FFT reference curves
   - available in spectrum analyzer
** New export formats
   - WAV export
   - RPCIII export
** Improved digital instrument
   - improved layout
   - configureable minimum digits and automatic unit prefix
** SCPI
   - Improved setup load (async)
** PUREC device support
   - Chassis visualization added
   - MSI displayed in channel overview
* Channel list
   - Width is now individually adjustable
* Settings:
   - New Amplifier / RS232 / RS485 page
   - Configure serial ports without a restart
* OXYGEN SDK
   - Export plugin extensions

* Fixes:
** Improved MATLAB export
   - Faster Compressed export
   - No interval split
** Improved EXPORT interface
   - Faster interface for 1000+ channels
** Improved CAN-OUT
   - Driver issues limit CAN-OUT to less than 700 messages per second
   - If this limit is exceeded, older messages get automatically dropped

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-10-29 Release Notice DEWETRON Oxygen R5.3.1 x64

* Components:
** DEWETRON Oxygen      R5.3.1   (5.3.1.56549)   (ed5059725981fcc70bbfe9e97e6c0b4994f505d2)

* Files:
** DEWETRON_Oxygen_Setup_R5.3.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.3.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
** Power instrument
   - Fixed NaN displays in power instrument when opening a DMD
** XCP
   - Fixed a memory leak
** Oxygen SDK
   - QML Sandbox fixed reload

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON Oxygen R5.4.0 x64

* Components:
** DEWETRON Oxygen      R5.4.0   (5.4.0.57188)   (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Files:
** DEWETRON_Oxygen_Setup_R5.4.0_x64.exe
** DEWETRON_DMDReader_R5.4.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.4.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Offline POWER Analysis
   - Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
   - Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
   - Support for TRION-MIL (PMC-1553)
   - MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
   - Support of new TRION3 Board
   - Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
   - Show optional harmonic cursors in FFT
   - Switch between Hz and CPM x-Axis
** CAN Channel Picker
   - Option to show only active messages
** CAN DBC Parser
   - More advanced fault tolerance and error reporting
** New features in Python Framework for future use
   - User Input Dialog
** MSI2-600-V
   - Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON Oxygen R5.5.0 x64

* Components:
** DEWETRON Oxygen      R5.5.0   (5.5.0.58073)   (bc6087b8b913f97749715137b6b4f8073628c55f)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.0_x64.exe
** DEWETRON_DMDReader_R5.5.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
   - Load external recorded Video (e.g. HS-Video) in Analysis Mode
   - Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
   - Create a screen capturing of the measurement screen
   - Select Framerate, Quality and Speed
** Setup Configuration Lock
   - Lock Configuration on Setup load to avoid manipulation
   - Select between different areas of lock
   - Unlock with Password
** Power Analysis
   - d/q Analysis for use with Synchronous Machines / BLDC
   - Harmonic Table view
** New Data Export Formats
   - NI Diadem DAT Export .dat
   - DynaWorks Neutral File .nt
** Additional SCPI Commands
   - Check Sync State
   - Create and modify header data
** Reworked Filename Composer
   - Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
   - Adjustable Line Width in Recorder and Spectrum Analyzer
   - Adaptive Linking of Recorders
   - Adjustment of X-Tick Labels in Recorder
   - Three size options for labels in Reporting pages
   - Resizable Sidebars
   - Recorder Mouse Label (activate in Recorder Settings)
   - Prompt Header after Measurement Stop
** Additional Features
   - h264 Encoder for Video
   - Bayer Data Format for GIGE-Camera (reduce data transfer)
   - Adjustable Playback Speed   
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
   - Plugins written with the OXYGEN SDK can now be used also offline
   - e.g. ARINC and MIL-STD Plugins or your own  
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON Oxygen R5.5.1 x64

* Components:
** DEWETRON Oxygen      R5.5.1   (5.5.1.58364)   (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Files:
** DEWETRON_Oxygen_Setup_R5.5.1_x64.exe
** DEWETRON_DMDReader_R5.5.1.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.5.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TRION3-AOUT-8
   - Added FileReplay support
** USB-Webcams
   - Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
   - Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
   - Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
   - Correctly visualize panel in overview
** Counter channels:
   - Enabled PulswWidth mode
** OXYGEN-NET
   - Fix for a potential crash when using custom file name patterns

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON Oxygen R5.6.0 x64

* Components:
** DEWETRON Oxygen      R5.6.0   (5.6.0.58865)   (4663542f6937dc4e564c56962ca6020fc595c639)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.0_x64.exe
** DEWETRON_DMDReader_R5.6.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* New Features Oxygen:
** TEDS Support:
   - Detection of IEEE 1451.4 compatible sensors (selection)
   - Apply of scaling and mode of measurement input
   - Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
   - Native Support of CPAD2/3 Modules
** ARXML support for CAN:
   - Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
   - Enable the user to manually select the TRIONet for measurement
   - Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
   - Use Numeric Header data in Formula
   - Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
   - Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
   - Kml-track data can be used  as
center, left or right boundary of lane
** Additional Improvements:
   - New Storing Option: Stop measurement after... additional to Pause
   - Increase Pre-Time and Freeze time up to 60 seconds
   - Manual (Recording)-Trigger via GUI or SCPI
   - File Name pattern, user defined counter offset
   - Formula Channels can now be also grouped
   - Navigate thru channel list with CTRL+PAGE UP/DOWN
   - Increased sensitivity of power flicker emission calculation

* Fixes:
   - Update of Graphic Framework to avoid screen flickering on intel graphics
   - CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
   - Error Message regarding Oversampling @ Setup loading
   - Problem with ACQ-Start with no channel Enabled on first DAQ Board

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON Oxygen R5.6.1 x64

* Components:
** DEWETRON Oxygen      R5.6.1   (5.6.1.58941)   (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed user scaling when loading setups using TRION-2402-V boards
   - Changed TRIONet claim default setting to "Auto claim USB"
   - Fixed modbus plugin dialog

* Known Limitations:
  - CPAD Baudrate Setting function is limited

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-16 Release Notice DEWETRON Oxygen R5.6.2 x64

* Components:
** DEWETRON Oxygen      R5.6.2   (5.6.2.59027)   (a87041cb4b6ea4c78f7222342120741f4a0f34c8)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.2_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.1)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Fixed a crash when UI elements from plugins are drawn
   - Qt memory leak fix
   - Fixed high memory consumption of the video instrument
   - Fixed invalid formulas on async channels
   - Fixed a crash when loading a complex modbus setup

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-08-06 Release Notice DEWETRON Oxygen R5.6.3 x64

* Components:
** DEWETRON Oxygen      R5.6.3   (5.6.3.59316)   (40bbfc76f51fac3b39db5a242ca9aef796bdb0f0)

* Files:
** DEWETRON_Oxygen_Setup_R5.6.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.6.3)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
   - Install TRION applications
   - Reboot system (if requested by the installer)
   - Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
   - Power-cycle TRION boards (Power down system, then restart)
   - Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
   - Install Oxygen
   - Verify HW settings in system menu on first startup

* Fixes:
   - Power: improved accuracy of RMS value calculation
   - Matrix Sampler: fixed high memory usage
   - CPAD: fixed crash when accessing removed devices
   - Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
   - Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
     - Needs TRION API 5.6.3 or better
   - Added support for TRION3-1820-POWER

* Known Limitations:
   - CPAD Baudrate Setting function is limited
   - when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-04 Release Notice DEWETRON Oxygen R5.1.1 x64

* Components:
** DEWETRON Oxygen      R5.1.1    (5.1.1.54768)   (89a86d505f09155520a64b46b36ba53cf2ef6b86)

* Files:
** DEWETRON_Oxygen_Setup_R5.1.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.1.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** CAN-FD
   - Set Samplepoint and advanced timing parameter

* Fixes:
** Common:
   - OXYGEN crashes when switching AI to CAN
** Export:
   - XLSX-Export have wrong output format (text instead of value)
** MSI:
   - MSI2-STG, no balance action possible on CB16
   - MSI2-STG, bridge factor missing in settings
** Intensity Diagram:
   - Scaling broken after changes of channel settings
** Spectrum Analyzer:
   - Phase channel is not rendered correctly
** Snapshot Channels:
   - Sporadic NaN values when using aggregation (e.g. AVG)
** TRION-POWER:
    - SUB-Modules have ranges with wrong scaling
** SCPI:
   - Command STORE:FILE:NAME not applicable
   - Command :NUM:DIMS? does not report the right sample dimension
** XCP:
   - Use of same Oxygen setup leads to different A2L-file
   - A2L-file contains non usable channels (e.g. Power Group Channel)
   - Connect/Disconnect sometimes lead to deadlock of Oxygen
   - adapt visible names in A2L for better compatiblity with CANoe
   - Improved stability

* Changes:
** Power:
   - channel's samplerate for mechanical power must be less or equal to U/I channels
** FFT:
   - FFT-Group channel (complex) is not stored by default

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-04 Release Notice DEWETRON Oxygen R5.1.1 x64

* Components:
** DEWETRON Oxygen      R5.1.1    (5.1.1.54768)   (89a86d505f09155520a64b46b36ba53cf2ef6b86)

* Files:
** DEWETRON_Oxygen_Setup_R5.1.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.1.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** CAN-FD
   - Set Samplepoint and advanced timing parameter

* Fixes:
** Common:
   - OXYGEN crashes when switching AI to CAN
** Export:
   - XLSX-Export have wrong output format (text instead of value)
** MSI:
   - MSI2-STG, no balance action possible on CB16
   - MSI2-STG, bridge factor missing in settings
** Intensity Diagram:
   - Scaling broken after changes of channel settings
** Spectrum Analyzer:
   - Phase channel is not rendered correctly
** Snapshot Channels:
   - Sporadic NaN values when using aggregation (e.g. AVG)
** TRION-POWER:
    - SUB-Modules have ranges with wrong scaling
** SCPI:
   - Command STORE:FILE:NAME not applicable
   - Command :NUM:DIMS? does not report the right sample dimension
** XCP:
   - Use of same Oxygen setup leads to different A2L-file
   - A2L-file contains non usable channels (e.g. Power Group Channel)
   - Connect/Disconnect sometimes lead to deadlock of Oxygen
   - adapt visible names in A2L for better compatiblity with CANoe
   - Improved stability

* Changes:
** Power:
   - channel's samplerate for mechanical power must be less or equal to U/I channels
** FFT:
   - FFT-Group channel (complex) is not stored by default

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-30 Release Notice DEWETRON Oxygen R5.1.0 x64

* Components:
** DEWETRON Oxygen      R5.1.0    (5.1.0.54560)   (813c00d657afde62743a6ce131ae1608f2a8b4bc)

* Files:
** DEWETRON_Oxygen_Setup_R5.1.0_x64.exe
** DEWETRON_DMDReader_R5.1.0.zip

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.1.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** Vector FlexRay support
   - Supports Fibex 2.0 to 4.1.2
   - Decoding to individual signals with offline support
   - Intuitive channel picker
** CAN-Offline decoding
   - Intuitive channel picker
** File Browser
   - Oxygen file browser is able to create new folders
   - Oxygen file browser is able to use standard file explorer ("Browse..." button)
** Filesplit by absolute time
   - Allows filesplits on rounded absolute time
** Array access in formula
   - Access single array elements
** OXYGEN Viewer
   - Review data files in parallel to a running Oxygen.
** Update of 6-Phase Calculation (Power)
   - Changed 6P6W schematic to 2x3P3W.
** Oxygen SDK
   - Improvements due to first reviews. More on GitHub (https://github.com/DEWETRON/OXYGEN-SDK)
** Oxygen GUI Improvements
   - Channel list: Unused channel groups are automatically folded
   - Channel list: Math formula editor now supports multiline edit
   - Channel list: Simple channel type filter
   - Improved tooltips
   - Cursors can now be renamed (A/B cursor)
   - Text instrument: Can display measurement time

* Fixes:
** Actions: Zero and Bridge Balance action on large systems
** Power:Crash with power group in special combinations with XCP
** Power: Crash when deleting power group on a special customer setup
** Trigger: Triggered recording: recording does not restart after resync
** Oxygen Net: High memory consumption when using Pause mode
** FFT: Fixed an invalid sign jump in the phase calculation
** EPAD/DAQP: Crash that may happens on module scans with invalid module addresses
** MSI: Fixed a scaling issue with MSI2-STG-5V, added missing Bridge Factor input field

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-05 Release Notice DEWETRON Oxygen R5.0.3 x64

* Components:
** DEWETRON Oxygen      R5.0.3    (5.0.3.54295)   (5cfbb19288f85929d38e68795382aca08c382fbe)

* Files:
** DEWETRON_Oxygen_Setup_R5.0.3_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.0.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* Fixes:
** GUI: Rendering of the channel mapping dialog took a long time.
** GUI: Cancelling the channel mapping dialog took a long time.
** GUI: Creation and adding a lot of channels to digital instruments was slow.
** Oxygen Net: High memory consumption on master and remote node.
** Oxygen Net: High cpu load with enabled gps channels.
** DAQP: DAQP modules could not be configured after loading a setup.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-01-20 Release Notice DEWETRON Oxygen R5.0.1 x64

* Components:
** DEWETRON Oxygen      R5.0.1    (5.0.1.53790)   (1342c33387a7abfeeb8b40b9b10ab1a6f39a3033)

* Files:
** DEWETRON_Oxygen_Setup_R5.0.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.0.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* Fixes:
** Fixed: Unresponsive UI interface issue

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-01-20 Release Notice DEWETRON Oxygen R5.0.1 x64

* Components:
** DEWETRON Oxygen      R5.0.1    (5.0.1.53790)   (1342c33387a7abfeeb8b40b9b10ab1a6f39a3033)

* Files:
** DEWETRON_Oxygen_Setup_R5.0.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.0.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* Fixes:
** Fixed: Unresponsive UI interface issue

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-01-20 Release Notice DEWETRON Oxygen R5.0.1 x64

* Components:
** DEWETRON Oxygen      R5.0.1    (5.0.1.53790)   (1342c33387a7abfeeb8b40b9b10ab1a6f39a3033)

* Files:
** DEWETRON_Oxygen_Setup_R5.0.1_x64.exe

* Requirements:
** 5.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION and TRION3 (DEWETRON TRION Software R5.0.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup

* Fixes:
** Fixed: Unresponsive UI interface issue

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2019-09-27 Release Notice DEWETRON Oxygen R3.7.0 x64

* Components:
** DEWETRON Oxygen      R3.7.0    (3.7.0.52578)   (ab62f024664ad23dd1f3c94e33d6c31c6b5bbf17)
** DEWETRON DMDReader   R3.7.0    (3.7.0.52578)   (ab62f024664ad23dd1f3c94e33d6c31c6b5bbf17)

* Files:
** DEWETRON_Oxygen_Setup_R3.7.0_x64.exe
** DEWETRON_DMDReader_R3.7.0.zip

* Requirements:
** 3.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION (DEWETRON TRION Software R3.7.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
***TRION:
** Uninstall previous Oxygen version
** Uninstall any previous TRION version via system uninstall (control panel).
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** HW support:
   -MSI-RTD adapter
   -MSI2 adapters
   -TRION[3]-18xx-POWER-4 Delay Compensation (phase-align current input)
** Sensor Database
   -choose sensor scaling/amplifier settings from editable database
** Table Scaling
** IIR Filter:
   -Bandpass and Bandstop filter
** Usability:
   -dark measurement screen
   -enter filename at recording start
   -export to DMD
   -export between cursors

* Support of MSI2-Adapters:
** MSI2-TH-x
** MSI2-250R-20mA
** MSI2-LVDT
** MSI2-STG-5V
** MSI2-STG-10V
** MSI2-CH-5
** MSI2-CH-100

* Fixes:
** GUI: now ready for HDPI-Screens, automatic setting of scaling for better compatiblity on 4k+ Displays
** CAN-OUT: much faster response in channel list when switching to transmit, fixed possible crash when using many transmit-messages
** dmd reader: correct behaviour when reading multifile-parts
** Oxygen Net: correct behaviour when using IRIG with no DIOs enabled
** Matlab-Export: Fixed problems with export of long-term measurements
** FFT: better performance of big FFT-calculations which lead to "High math load" warning
** Highspeed: Fixed problems using fast TRION3-Modules which caused "Unable to read data" Error

* Known Limitations, general (additional to Oxygen 3.6):
** DMD-Export: May not work correctly with multifile-parts and offline calculated channels
** DMD-Export: Changes in setup will only be exported when saved before to origin file
** DMD-Export: Offline created channels will only be exported when saved before to origin file
** DMD-Export: Orange cursor in reporting pages will not be moved to exported area

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2019-09-27 Release Notice DEWETRON Oxygen R3.7.0 x64

* Components:
** DEWETRON Oxygen      R3.7.0    (3.7.0.52578)   (ab62f024664ad23dd1f3c94e33d6c31c6b5bbf17)
** DEWETRON DMDReader   R3.7.0    (3.7.0.52578)   (ab62f024664ad23dd1f3c94e33d6c31c6b5bbf17)

* Files:
** DEWETRON_Oxygen_Setup_R3.7.0_x64.exe
** DEWETRON_DMDReader_R3.7.0.zip

* Requirements:
** 3.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION (DEWETRON TRION Software R3.7.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
***TRION:
** Uninstall previous Oxygen version
** Uninstall any previous TRION version via system uninstall (control panel).
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** HW support:
   -MSI-RTD adapter
   -MSI2 adapters
   -TRION[3]-18xx-POWER-4 Delay Compensation (phase-align current input)
** Sensor Database
   -choose sensor scaling/amplifier settings from editable database
** Table Scaling
** IIR Filter:
   -Bandpass and Bandstop filter
** Usability:
   -dark measurement screen
   -enter filename at recording start
   -export to DMD
   -export between cursors

* Support of MSI2-Adapters:
** MSI2-TH-x
** MSI2-250R-20mA
** MSI2-LVDT
** MSI2-STG-5V
** MSI2-STG-10V
** MSI2-CH-5
** MSI2-CH-100

* Fixes:
** GUI: now ready for HDPI-Screens, automatic setting of scaling for better compatiblity on 4k+ Displays
** CAN-OUT: much faster response in channel list when switching to transmit, fixed possible crash when using many transmit-messages
** dmd reader: correct behaviour when reading multifile-parts
** Oxygen Net: correct behaviour when using IRIG with no DIOs enabled
** Matlab-Export: Fixed problems with export of long-term measurements
** FFT: better performance of big FFT-calculations which lead to "High math load" warning
** Highspeed: Fixed problems using fast TRION3-Modules which caused "Unable to read data" Error

* Known Limitations, general (additional to Oxygen 3.6):
** DMD-Export: May not work correctly with multifile-parts and offline calculated channels
** DMD-Export: Changes in setup will only be exported when saved before to origin file
** DMD-Export: Offline created channels will only be exported when saved before to origin file
** DMD-Export: Orange cursor in reporting pages will not be moved to exported area

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2019-09-27 Release Notice DEWETRON Oxygen R3.7.0 x64

* Components:
** DEWETRON Oxygen      R3.7.0    (3.7.0.52578)   (ab62f024664ad23dd1f3c94e33d6c31c6b5bbf17)
** DEWETRON DMDReader   R3.7.0    (3.7.0.52578)   (ab62f024664ad23dd1f3c94e33d6c31c6b5bbf17)

* Files:
** DEWETRON_Oxygen_Setup_R3.7.0_x64.exe
** DEWETRON_DMDReader_R3.7.0.zip

* Requirements:
** 3.x Software License required!
** OS: Windows 10 64bit, Windows 7 64bit
** CPU: Intel i5 3rd gen. or better
** RAM: 8 GB
** DAQ Hardware:
    * DEWETRON TRION (DEWETRON TRION Software R3.7.0)
    * DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
    * DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)

* Installation procedure:
***TRION:
** Uninstall previous Oxygen version
** Uninstall any previous TRION version via system uninstall (control panel).
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Install Oxygen
** Verify HW settings in system menu on first startup

* New Features Oxygen:
** HW support:
   -MSI-RTD adapter
   -MSI2 adapters
   -TRION[3]-18xx-POWER-4 Delay Compensation (phase-align current input)
** Sensor Database
   -choose sensor scaling/amplifier settings from editable database
** Table Scaling
** IIR Filter:
   -Bandpass and Bandstop filter
** Usability:
   -dark measurement screen
   -enter filename at recording start
   -export to DMD
   -export between cursors

* Support of MSI2-Adapters:
** MSI2-TH-x
** MSI2-250R-20mA
** MSI2-LVDT
** MSI2-STG-5V
** MSI2-STG-10V
** MSI2-CH-5
** MSI2-CH-100

* Fixes:
** GUI: now ready for HDPI-Screens, automatic setting of scaling for better compatiblity on 4k+ Displays
** CAN-OUT: much faster response in channel list when switching to transmit, fixed possible crash when using many transmit-messages
** dmd reader: correct behaviour when reading multifile-parts
** Oxygen Net: correct behaviour when using IRIG with no DIOs enabled
** Matlab-Export: Fixed problems with export of long-term measurements
** FFT: better performance of big FFT-calculations which lead to "High math load" warning
** Highspeed: Fixed problems using fast TRION3-Modules which caused "Unable to read data" Error

* Known Limitations, general (additional to Oxygen 3.6):
** DMD-Export: May not work correctly with multifile-parts and offline calculated channels
** DMD-Export: Changes in setup will only be exported when saved before to origin file
** DMD-Export: Offline created channels will only be exported when saved before to origin file
** DMD-Export: Orange cursor in reporting pages will not be moved to exported area

DEWETRON Oxygen Setup R3.6.2 x64

DEWETRON Oxygen R3.6.2 TRION Bundle

DEWETRON Oxygen R3.6.2 ORION Bundle

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

2021-09-30 Release Notice DEWETRON TRIONet Firmware R5.7.0

* Version: 5.7.0.59822 (628025304b3b14322e344be35a46eb8ce8501407)

* Components:

** TRIONet Firmware                5.7.0

* Files:

** TRIONet remote update:          update-image-trionet-5.7.0.59822.swu

** TRIONet USB stick image:        trionet_update_stick_image_5.7.0.59822.zip

* TRIONet node info:

** OS:                             Yocto warrior-21.0.3

** Server:                         5.7.0.59822

** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)

** TRION API:                      5.7.0.59822

** TRION DRV:                      5.7.0.59822

* Requirements:

** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:

  - General bug fixes and improvements

* Known Limitations:

** None

* HW Support TRION modules:

** TRION-1620-ACC-6-BNC         FW: x0031

** TRION-1620-ACC-6-L1B         FW: x0031

** TRION-1620-LV-6-BNC          FW: x0031

** TRION-1620-LV-6-L1B          FW: x0031

** TRION-1603-LV-6-BNC          FW: x0A15

** TRION-1603-LV-6-L1B          FW: x0A15

** TRION-1603-LV-6-D25          FW: x0A15

** TRION-1600-dLV-16-D          FW: x1893

** TRION-1600-dLV-16-D-CAN      FW: x1893

** TRION-1600-dLV-32-D          FW: x1893

** TRION-1600-dLV-32-D-CAN      FW: x1893

** TRION-1802-dLV-16-D          FW: x1893

** TRION-1802-dLV-16-D-CAN      FW: x1893

** TRION-1802-dLV-32-D          FW: x1893

** TRION-1802-dLV-32-D-CAN      FW: x1893

** TRION-1810-HV-4              FW: x0064

** TRION-1810-HV-8              FW: x0064

** TRION-1820-POWER-4           FW: x0064

** TRION-1810M-POWER-4          FW: x0064

** TRION-1820-MULTI-4-D         FW: x0030

** TRION-2402-MULTI-4-D         FW: x0B18

** TRION-2402-MULTI-8-L0B       FW: x0A24

** TRION-2402-MULTI-S1          FW: x0034

** TRION-2402-dSTG-6-L1B        FW: x1120

** TRION-2402-dSTG-6-L1B-S1     FW: x1120

** TRION-2402-dSTG-8-D          FW: x1120

** TRION-2402-dSTG-8-L0B        FW: x1120

** TRION-2402-dSTG-8-RJ         FW: x1120

** TRION-2400-dSTG-8-L0B        FW: x1120

** TRION-2400-dSTG-OEM          FW: x1120

** TRION-2402-dACC-6-BNC        FW: x1119

** TRION-2402-dACC-8-SMB        FW: x1119

** TRION-2402-dACC-8-MD         FW: x1119

** TRION-2402-V-4-B             FW: x1017

** TRION-2402-V-8-B             FW: x1017

** TRION-CNT-6-L1B              FW: x1119

** TRION-BASE                   FW: x1145

** TRION-TIMING                 FW: x1145

** TRION-TIMING-V2              FW: x0004

** TRION-TIMING-V3              FW: xF016   MCU: x00020095

** TRION-VGPS-20                FW: x1145

** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095

** TRION-VGPS-100               FW: x1145

** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095

** TRION-CAN-4                  FW: x1122

** TRION-CAN-2                  FW: x1122

** TRION-DI-48                  FW: x1119

** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

2021-09-30 Release Notice DEWETRON TRION API R5.7.0

* Version: 5.7.0.59822 (628025304b3b14322e344be35a46eb8ce8501407)

* Components:

** DEWETRON Explorer                    5.7.0.59822

** DEWETRON TRION API                   5.7.0.59822

** DEWETRON TRION driver                5.7.0.59822

** DEWETRON DEWE2 driver                5.7.0.59822

** DEWE-TRION board information         1632986773

** DEWE enclosure information           1632986773

** DEWE-TRION firmware revisions        1632986773

** DEWE-TRION TEDS default data         1632986773

* Files:

** DEWETRON-TRION-Applications-5.7.0.59822.exe

* Requirements:

** Update all TRION modules to the latest firmware included in this release

** Use OXYGEN R5.7 or higher

** Windows 10 64-Bit

* Installation procedure:

** Install TRION applications

** Reboot system (if requested by the installer)

** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)

** Power-cycle TRION boards (Power down system, then restart)

** Start DEWETRON Explorer and check for a successful firmware upgrade

* New Features and most important bugfixes:

** TRION-AO channel numbers fixed

** TRION-AO enabled FGEN clipping

* Known Limitations:

** None

* HW Support TRION modules:

** TRION3-1810M-POWER-4         FW: x0064

** TRION3-1810-SUB-8            FW: x0015

** TRION3-1820-MULTI-4-D        FW: x0030

** TRION3-1820-MULTI-8-L0B      FW: x0030

** TRION3-1850-MULTI-4-D        FW: x0030

** TRION3-1850-MULTI-8-L0B      FW: x0030

** TRION3-AOUT-8                FW: x0035

** TRION-1620-ACC-6-BNC         FW: x0031

** TRION-1620-ACC-6-L1B         FW: x0031

** TRION-1620-LV-6-BNC          FW: x0031

** TRION-1620-LV-6-L1B          FW: x0031

** TRION-1603-LV-6-BNC          FW: x0A15

** TRION-1603-LV-6-L1B          FW: x0A15

** TRION-1603-LV-6-D25          FW: x0A15

** TRION-1600-dLV-16-D          FW: x1893

** TRION-1600-dLV-16-D-CAN      FW: x1893

** TRION-1600-dLV-32-D          FW: x1893

** TRION-1600-dLV-32-D-CAN      FW: x1893

** TRION-1802-dLV-16-D          FW: x1893

** TRION-1802-dLV-16-D-CAN      FW: x1893

** TRION-1802-dLV-32-D          FW: x1893

** TRION-1802-dLV-32-D-CAN      FW: x1893

** TRION-1810-HV-4              FW: x0064

** TRION-1810-HV-8              FW: x0064

** TRION-1820-POWER-4           FW: x0064

** TRION-1810M-POWER-4          FW: x0064

** TRION-1820-MULTI-4-D         FW: x0030

** TRION-2402-MULTI-4-D         FW: x0B18

** TRION-2402-MULTI-8-L0B       FW: x0A24

** TRION-2402-MULTI-S1          FW: x0034

** TRION-2402-dSTG-6-L1B        FW: x1120

** TRION-2402-dSTG-6-L1B-S1     FW: x1120

** TRION-2402-dSTG-8-D          FW: x1120

** TRION-2402-dSTG-8-L0B        FW: x1120

** TRION-2402-dSTG-8-RJ         FW: x1120

** TRION-2400-dSTG-8-L0B        FW: x1120

** TRION-2400-dSTG-OEM          FW: x1120

** TRION-2402-dACC-6-BNC        FW: x1119

** TRION-2402-dACC-8-SMB        FW: x1119

** TRION-2402-dACC-8-MD         FW: x1119

** TRION-2402-V-4-B             FW: x1017

** TRION-2402-V-8-B             FW: x1017

** TRION-CNT-6-L1B              FW: x1119

** TRION-BASE                   FW: x1145

** TRION-TIMING                 FW: x1145

** TRION-TIMING-V2              FW: x0004

** TRION-TIMING-V3              FW: xF016   MCU: x00020095

** TRION-VGPS-20                FW: x1145

** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095

** TRION-VGPS-100               FW: x1145

** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095

** TRION-CAN-4                  FW: x1122

** TRION-CAN-2                  FW: x1122

** TRION-DI-48                  FW: x1119

** TRION-DI-64-S1               FW: x0009

* HW Support PUREC:

** PUREC-200                    FW: x1893

** PUREC-50                     FW: x1893

* HW Support DEWE3 chassis:

** DEWE3-PA8

** DEWE3-A4

** DEWE3-M4

** DEWE3-RM4

** DEWE3-RM8

** DEWE3-RM12

** DEWE3-RM16

* HW Support DEWE2 chassis:

** DEWE2-PA7

** DEWE2-A4

** DEWE2-A4L

** DEWE2-A7

** DEWE2-A13

** DEWE2-M4

** DEWE2-M4s

** DEWE2-M7

** DEWE2-M7s

** DEWE2-M13

** DEWE2-M13s

** DEWE2-M18

** DEWE2-F4s

** DEWE2-F7s

** DEWE2-F13s

** DEWE2-F18

** DEWE2-F4-THUNDERBOLT

** DEWE2-F13-FIBRE

** TRIONet

** TrendCorder

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

2021-09-30 Release Notice DEWETRON TRIONet Firmware R5.7.0

* Version: 5.7.0.59822 (628025304b3b14322e344be35a46eb8ce8501407)

* Components:

** TRIONet Firmware                5.7.0

* Files:

** TRIONet remote update:          update-image-trionet-5.7.0.59822.swu

** TRIONet USB stick image:        trionet_update_stick_image_5.7.0.59822.zip

* TRIONet node info:

** OS:                             Yocto warrior-21.0.3

** Server:                         5.7.0.59822

** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)

** TRION API:                      5.7.0.59822

** TRION DRV:                      5.7.0.59822

* Requirements:

** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:

  - General bug fixes and improvements

* Known Limitations:

** None

* HW Support TRION modules:

** TRION-1620-ACC-6-BNC         FW: x0031

** TRION-1620-ACC-6-L1B         FW: x0031

** TRION-1620-LV-6-BNC          FW: x0031

** TRION-1620-LV-6-L1B          FW: x0031

** TRION-1603-LV-6-BNC          FW: x0A15

** TRION-1603-LV-6-L1B          FW: x0A15

** TRION-1603-LV-6-D25          FW: x0A15

** TRION-1600-dLV-16-D          FW: x1893

** TRION-1600-dLV-16-D-CAN      FW: x1893

** TRION-1600-dLV-32-D          FW: x1893

** TRION-1600-dLV-32-D-CAN      FW: x1893

** TRION-1802-dLV-16-D          FW: x1893

** TRION-1802-dLV-16-D-CAN      FW: x1893

** TRION-1802-dLV-32-D          FW: x1893

** TRION-1802-dLV-32-D-CAN      FW: x1893

** TRION-1810-HV-4              FW: x0064

** TRION-1810-HV-8              FW: x0064

** TRION-1820-POWER-4           FW: x0064

** TRION-1810M-POWER-4          FW: x0064

** TRION-1820-MULTI-4-D         FW: x0030

** TRION-2402-MULTI-4-D         FW: x0B18

** TRION-2402-MULTI-8-L0B       FW: x0A24

** TRION-2402-MULTI-S1          FW: x0034

** TRION-2402-dSTG-6-L1B        FW: x1120

** TRION-2402-dSTG-6-L1B-S1     FW: x1120

** TRION-2402-dSTG-8-D          FW: x1120

** TRION-2402-dSTG-8-L0B        FW: x1120

** TRION-2402-dSTG-8-RJ         FW: x1120

** TRION-2400-dSTG-8-L0B        FW: x1120

** TRION-2400-dSTG-OEM          FW: x1120

** TRION-2402-dACC-6-BNC        FW: x1119

** TRION-2402-dACC-8-SMB        FW: x1119

** TRION-2402-dACC-8-MD         FW: x1119

** TRION-2402-V-4-B             FW: x1017

** TRION-2402-V-8-B             FW: x1017

** TRION-CNT-6-L1B              FW: x1119

** TRION-BASE                   FW: x1145

** TRION-TIMING                 FW: x1145

** TRION-TIMING-V2              FW: x0004

** TRION-TIMING-V3              FW: xF016   MCU: x00020095

** TRION-VGPS-20                FW: x1145

** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095

** TRION-VGPS-100               FW: x1145

** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095

** TRION-CAN-4                  FW: x1122

** TRION-CAN-2                  FW: x1122

** TRION-DI-48                  FW: x1119

** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-09-30 Release Notice DEWETRON TRIONet Firmware R5.3.0

* Version:     5.3.0.56281 (Rev.: 1e90a1a1d079709fe3d76285f1ac412f02c18934)

* Components:
** TRIONet Firmware                5.3.0

* Files:
** TRIONet remote update:          update-image-trionet-5.3.0.40.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.3.0.40.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.3.0.56281
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.3.0.56281
** TRION DRV:                      5.3.0.56281

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
 
* New Features and most important bugfixes:
** Selftest for all CAN devices
** Support for DEWETRON TRIONCAl

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0027
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-09-30 Release Notice DEWETRON TRIONet Firmware R5.3.0

* Version:     5.3.0.56281 (Rev.: 1e90a1a1d079709fe3d76285f1ac412f02c18934)

* Components:
** TRIONet Firmware                5.3.0

* Files:
** TRIONet remote update:          update-image-trionet-5.3.0.40.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.3.0.40.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.3.0.56281
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.3.0.56281
** TRION DRV:                      5.3.0.56281

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
 
* New Features and most important bugfixes:
** Selftest for all CAN devices
** Support for DEWETRON TRIONCAl

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0027
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON TRIONet Firmware R5.4.0

* Version:     5.4.0.57188 (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Components:
** TRIONet Firmware                5.4.0

* Files:
** TRIONet remote update:          update-image-trionet-5.4.0.57188.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.4.0.57188.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.4.0.57188
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.4.0.57188
** TRION DRV:                      5.4.0.57188

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
 
* New Features and most important bugfixes:
** MSI2_V_600 support added
** Reduced update image size by 50%
** TRION-TIMING-V3
   - Fixed off by 1 second sync issue (PTP)

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0028
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON TRIONet Firmware R5.4.0

* Version:     5.4.0.57188 (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Components:
** TRIONet Firmware                5.4.0

* Files:
** TRIONet remote update:          update-image-trionet-5.4.0.57188.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.4.0.57188.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.4.0.57188
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.4.0.57188
** TRION DRV:                      5.4.0.57188

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
 
* New Features and most important bugfixes:
** MSI2_V_600 support added
** Reduced update image size by 50%
** TRION-TIMING-V3
   - Fixed off by 1 second sync issue (PTP)

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0028
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-12-17 Release Notice DEWETRON TRIONet Firmware R5.4.0

* Version:     5.4.0.57188 (6c764e151e2095b03e6d50111a3b2f3c0ef76241)

* Components:
** TRIONet Firmware                5.4.0

* Files:
** TRIONet remote update:          update-image-trionet-5.4.0.57188.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.4.0.57188.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.4.0.57188
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.4.0.57188
** TRION DRV:                      5.4.0.57188

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
 
* New Features and most important bugfixes:
** MSI2_V_600 support added
** Reduced update image size by 50%
** TRION-TIMING-V3
   - Fixed off by 1 second sync issue (PTP)

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0028
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-02-35 Release Notice DEWETRON TRIONet Firmware R5.4.1

* Version:     5.4.1.57738 (Rev.: 80cc9f2865efe27b9a6899dda0f41a3098bbd507)

* Components:
** TRIONet Firmware                5.4.1

* Files:
** TRIONet remote update:          update-image-trionet-5.4.1.57738.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.4.1.57738.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.4.1.57738
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.4.1.57738
** TRION DRV:                      5.4.1.57738

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** TRION boards not found on power up:
   - Fixed an issue when boards were not found.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-02-35 Release Notice DEWETRON TRIONet Firmware R5.4.1

* Version:     5.4.1.57738 (Rev.: 80cc9f2865efe27b9a6899dda0f41a3098bbd507)

* Components:
** TRIONet Firmware                5.4.1

* Files:
** TRIONet remote update:          update-image-trionet-5.4.1.57738.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.4.1.57738.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.4.1.57738
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.4.1.57738
** TRION DRV:                      5.4.1.57738

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** TRION boards not found on power up:
   - Fixed an issue when boards were not found.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-02-35 Release Notice DEWETRON TRIONet Firmware R5.4.1

* Version:     5.4.1.57738 (Rev.: 80cc9f2865efe27b9a6899dda0f41a3098bbd507)

* Components:
** TRIONet Firmware                5.4.1

* Files:
** TRIONet remote update:          update-image-trionet-5.4.1.57738.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.4.1.57738.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.4.1.57738
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.4.1.57738
** TRION DRV:                      5.4.1.57738

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** TRION boards not found on power up:
   - Fixed an issue when boards were not found.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON TRIONet Firmware R5.5.0

* Version:     5.5.0.58071 (95fa60d9265bc9082289938cbc966427d9fbe8a9)

* Components:
** TRIONet Firmware                5.5.0

* Files:
** TRIONet remote update:          update-image-trionet-5.5.0.58071.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.5.0.58071.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.5.0.58071
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.5.0.58071
** TRION DRV:                      5.5.0.58071

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** Self Test:
   - "Board RAM" test enabled for
     - TRION-1600-dLV-16-D
     - TRION-1600-dLV-16-D-CAN
     - TRION-1600-dLV-32-D    
     - TRION-1600-dLV-32-D-CAN
     - TRION-1802-dLV-16-D    
     - TRION-1802-dLV-16-D-CAN
     - TRION-1802-dLV-32-D    
     - TRION-1802-dLV-32-D-CAN
     - TRION-1820-MULTI-4-D
     - TRION-1820-POWER-4
     - TRION-1810M-POWER-4

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0028
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON TRIONet Firmware R5.5.1

* Version:     5.5.1.58364 (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Components:
** TRIONet Firmware                5.5.1

* Files:
** TRIONet remote update:          update-image-trionet-5.5.1.58364.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.5.1.58364.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.5.1.58364
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.5.1.58364
** TRION DRV:                      5.5.1.58364

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** New firmware fixing reboot issue
   - TRION-1820-MULTI-4-D
** TRION-2402-V
   - Added oversampling option

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0029
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON TRIONet Firmware R5.6.0

* Version:     5.6.0.58864 (947373dfd06c45bfd05507bfd6cbd8e057d5227f)

* Components:
** TRIONet Firmware                5.6.0

* Files:
** TRIONet remote update:          update-image-trionet-5.6.0.58864.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.6.0.58864.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.6.0.58864
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.6.0.58864
** TRION DRV:                      5.6.0.58864

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
  - TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
  - Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
  - Increased reliablity when scanning for TEDS-devices on systems with high data-load
  - TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
  - Oversampling Configuration Item corrected

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0029
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON TRIONet Firmware R5.6.1

* Version:     5.6.1.58941 (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Components:
** TRIONet Firmware                5.6.1

* Files:
** TRIONet remote update:          update-image-trionet-5.6.1.58941.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.6.1.58941.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.6.1.58941
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.6.1.58941
** TRION DRV:                      5.6.1.58941

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
  - Added FPGA firmware protection

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1893
** TRION-1600-dLV-16-D-CAN      FW: x1893
** TRION-1600-dLV-32-D          FW: x1893
** TRION-1600-dLV-32-D-CAN      FW: x1893
** TRION-1802-dLV-16-D          FW: x1893
** TRION-1802-dLV-16-D-CAN      FW: x1893
** TRION-1802-dLV-32-D          FW: x1893
** TRION-1802-dLV-32-D-CAN      FW: x1893
** TRION-1810-HV-4              FW: x0064
** TRION-1810-HV-8              FW: x0064
** TRION-1820-POWER-4           FW: x0064
** TRION-1810M-POWER-4          FW: x0064
** TRION-1820-MULTI-4-D         FW: x0030
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON TRIONet Firmware R5.6.1

* Version:     5.6.1.58941 (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Components:
** TRIONet Firmware                5.6.1

* Files:
** TRIONet remote update:          update-image-trionet-5.6.1.58941.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.6.1.58941.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.6.1.58941
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.6.1.58941
** TRION DRV:                      5.6.1.58941

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
  - Added FPGA firmware protection

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1893
** TRION-1600-dLV-16-D-CAN      FW: x1893
** TRION-1600-dLV-32-D          FW: x1893
** TRION-1600-dLV-32-D-CAN      FW: x1893
** TRION-1802-dLV-16-D          FW: x1893
** TRION-1802-dLV-16-D-CAN      FW: x1893
** TRION-1802-dLV-32-D          FW: x1893
** TRION-1802-dLV-32-D-CAN      FW: x1893
** TRION-1810-HV-4              FW: x0064
** TRION-1810-HV-8              FW: x0064
** TRION-1820-POWER-4           FW: x0064
** TRION-1810M-POWER-4          FW: x0064
** TRION-1820-MULTI-4-D         FW: x0030
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON TRIONet Firmware R5.5.0

* Version:     5.5.0.58071 (95fa60d9265bc9082289938cbc966427d9fbe8a9)

* Components:
** TRIONet Firmware                5.5.0

* Files:
** TRIONet remote update:          update-image-trionet-5.5.0.58071.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.5.0.58071.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.5.0.58071
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.5.0.58071
** TRION DRV:                      5.5.0.58071

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** Self Test:
   - "Board RAM" test enabled for
     - TRION-1600-dLV-16-D
     - TRION-1600-dLV-16-D-CAN
     - TRION-1600-dLV-32-D    
     - TRION-1600-dLV-32-D-CAN
     - TRION-1802-dLV-16-D    
     - TRION-1802-dLV-16-D-CAN
     - TRION-1802-dLV-32-D    
     - TRION-1802-dLV-32-D-CAN
     - TRION-1820-MULTI-4-D
     - TRION-1820-POWER-4
     - TRION-1810M-POWER-4

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0028
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON TRIONet Firmware R5.5.1

* Version:     5.5.1.58364 (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Components:
** TRIONet Firmware                5.5.1

* Files:
** TRIONet remote update:          update-image-trionet-5.5.1.58364.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.5.1.58364.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.5.1.58364
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.5.1.58364
** TRION DRV:                      5.5.1.58364

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** New firmware fixing reboot issue
   - TRION-1820-MULTI-4-D
** TRION-2402-V
   - Added oversampling option

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0029
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON TRIONet Firmware R5.6.0

* Version:     5.6.0.58864 (947373dfd06c45bfd05507bfd6cbd8e057d5227f)

* Components:
** TRIONet Firmware                5.6.0

* Files:
** TRIONet remote update:          update-image-trionet-5.6.0.58864.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.6.0.58864.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.6.0.58864
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.6.0.58864
** TRION DRV:                      5.6.0.58864

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
  - TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
  - Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
  - Increased reliablity when scanning for TEDS-devices on systems with high data-load
  - TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
  - Oversampling Configuration Item corrected

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0029
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-07-09 Release Notice DEWETRON TRIONet Firmware R5.6.1

* Version:     5.6.1.58941 (6e94b558a6fc31726ca09a9a4381b24274efa429)

* Components:
** TRIONet Firmware                5.6.1

* Files:
** TRIONet remote update:          update-image-trionet-5.6.1.58941.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.6.1.58941.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.6.1.58941
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.6.1.58941
** TRION DRV:                      5.6.1.58941

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
  - Added FPGA firmware protection

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1893
** TRION-1600-dLV-16-D-CAN      FW: x1893
** TRION-1600-dLV-32-D          FW: x1893
** TRION-1600-dLV-32-D-CAN      FW: x1893
** TRION-1802-dLV-16-D          FW: x1893
** TRION-1802-dLV-16-D-CAN      FW: x1893
** TRION-1802-dLV-32-D          FW: x1893
** TRION-1802-dLV-32-D-CAN      FW: x1893
** TRION-1810-HV-4              FW: x0064
** TRION-1810-HV-8              FW: x0064
** TRION-1820-POWER-4           FW: x0064
** TRION-1810M-POWER-4          FW: x0064
** TRION-1820-MULTI-4-D         FW: x0030
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-03-31 Release Notice DEWETRON TRIONet Firmware R5.5.0

* Version:     5.5.0.58071 (95fa60d9265bc9082289938cbc966427d9fbe8a9)

* Components:
** TRIONet Firmware                5.5.0

* Files:
** TRIONet remote update:          update-image-trionet-5.5.0.58071.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.5.0.58071.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.5.0.58071
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.5.0.58071
** TRION DRV:                      5.5.0.58071

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** Self Test:
   - "Board RAM" test enabled for
     - TRION-1600-dLV-16-D
     - TRION-1600-dLV-16-D-CAN
     - TRION-1600-dLV-32-D    
     - TRION-1600-dLV-32-D-CAN
     - TRION-1802-dLV-16-D    
     - TRION-1802-dLV-16-D-CAN
     - TRION-1802-dLV-32-D    
     - TRION-1802-dLV-32-D-CAN
     - TRION-1820-MULTI-4-D
     - TRION-1820-POWER-4
     - TRION-1810M-POWER-4

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0028
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-05-10 Release Notice DEWETRON TRIONet Firmware R5.5.1

* Version:     5.5.1.58364 (42cbc261176d40eaa3137c9b68dd3ff425078edb)

* Components:
** TRIONet Firmware                5.5.1

* Files:
** TRIONet remote update:          update-image-trionet-5.5.1.58364.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.5.1.58364.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.5.1.58364
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.5.1.58364
** TRION DRV:                      5.5.1.58364

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** New firmware fixing reboot issue
   - TRION-1820-MULTI-4-D
** TRION-2402-V
   - Added oversampling option

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0029
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2021-06-30 Release Notice DEWETRON TRIONet Firmware R5.6.0

* Version:     5.6.0.58864 (947373dfd06c45bfd05507bfd6cbd8e057d5227f)

* Components:
** TRIONet Firmware                5.6.0

* Files:
** TRIONet remote update:          update-image-trionet-5.6.0.58864.swu
** TRIONet USB stick image:        trionet_update_stick_image_5.6.0.58864.zip

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.6.0.58864
** Firmware:                       4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
** TRION API:                      5.6.0.58864
** TRION DRV:                      5.6.0.58864

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
  - TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
  - Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
  - Increased reliablity when scanning for TEDS-devices on systems with high data-load
  - TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
  - Oversampling Configuration Item corrected

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1892
** TRION-1600-dLV-16-D-CAN      FW: x1892
** TRION-1600-dLV-32-D          FW: x1892
** TRION-1600-dLV-32-D-CAN      FW: x1892
** TRION-1802-dLV-16-D          FW: x1892
** TRION-1802-dLV-16-D-CAN      FW: x1892
** TRION-1802-dLV-32-D          FW: x1892
** TRION-1802-dLV-32-D-CAN      FW: x1892
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0029
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020095
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020095
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020095
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-06-29 Release Notice DEWETRON TRIONet Firmware R5.2.0

* Version:     5.2.0.55324 (Rev.: 7fdcd54fb5a17fbe813c830d08a6a86a89efe987)

* Components:
** TRIONet Firmware                5.2.0

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.2.0.29.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.2.0.55324
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.2.0.55324
** TRION DRV:                      5.2.0.55324

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** TRION-18XX-MULTI:
   - Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
   - Added encoder counter mode
** CB16
   - MSI not correctly detected when EPADS are used

* HW Support TRION modules:
** TRION3-1810M-POWER-4         FW: x0063
** TRION3-1820-MULTI-4-D        FW: x0024
** TRION3-1820-MULTI-8-L0B      FW: x0024
** TRION3-1850-MULTI-4-D        FW: x0024
** TRION3-1850-MULTI-8-L0B      FW: x0024
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0024
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-06-29 Release Notice DEWETRON TRIONet Firmware R5.2.0

* Version:     5.2.0.55324 (Rev.: 7fdcd54fb5a17fbe813c830d08a6a86a89efe987)

* Components:
** TRIONet Firmware                5.2.0

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.2.0.29.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.2.0.55324
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.2.0.55324
** TRION DRV:                      5.2.0.55324

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** TRION-18XX-MULTI:
   - Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
   - Added encoder counter mode
** CB16
   - MSI not correctly detected when EPADS are used

* HW Support TRION modules:
** TRION3-1810M-POWER-4         FW: x0063
** TRION3-1820-MULTI-4-D        FW: x0024
** TRION3-1820-MULTI-8-L0B      FW: x0024
** TRION3-1850-MULTI-4-D        FW: x0024
** TRION3-1850-MULTI-8-L0B      FW: x0024
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0024
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-06-29 Release Notice DEWETRON TRIONet Firmware R5.2.0

* Version:     5.2.0.55324 (Rev.: 7fdcd54fb5a17fbe813c830d08a6a86a89efe987)

* Components:
** TRIONet Firmware                5.2.0

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.2.0.29.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.2.0.55324
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.2.0.55324
** TRION DRV:                      5.2.0.55324

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** TRION-18XX-MULTI:
   - Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
   - Added encoder counter mode
** CB16
   - MSI not correctly detected when EPADS are used

* HW Support TRION modules:
** TRION3-1810M-POWER-4         FW: x0063
** TRION3-1820-MULTI-4-D        FW: x0024
** TRION3-1820-MULTI-8-L0B      FW: x0024
** TRION3-1850-MULTI-4-D        FW: x0024
** TRION3-1850-MULTI-8-L0B      FW: x0024
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0024
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-12 Release Notice DEWETRON TRIONet Firmware R5.1.2

* Version:     5.1.2.54832 (Rev.: a96a53c58dbbbca3cd551719450ba35b316cab63)

* Components:
** TRIONet Firmware                5.1.2

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.2.26.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.2.54832
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.2.54832
** TRION DRV:                      5.1.2.54832

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** CPAD Setup Tool:
   - Fixed bluescreen on DEWE3 enclosures

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-12 Release Notice DEWETRON TRIONet Firmware R5.1.2

* Version:     5.1.2.54832 (Rev.: a96a53c58dbbbca3cd551719450ba35b316cab63)

* Components:
** TRIONet Firmware                5.1.2

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.2.26.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.2.54832
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.2.54832
** TRION DRV:                      5.1.2.54832

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** CPAD Setup Tool:
   - Fixed bluescreen on DEWE3 enclosures

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-12 Release Notice DEWETRON TRIONet Firmware R5.1.2

* Version:     5.1.2.54832 (Rev.: a96a53c58dbbbca3cd551719450ba35b316cab63)

* Components:
** TRIONet Firmware                5.1.2

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.2.26.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.2.54832
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.2.54832
** TRION DRV:                      5.1.2.54832

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** CPAD Setup Tool:
   - Fixed bluescreen on DEWE3 enclosures

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-04 Release Notice DEWETRON TRIONet Firmware R5.1.1

* Version:     5.1.1.54790 (Rev.: e87e644d4f9c0dcd4727c174d822d44c42e26f67)

* Components:
** TRIONet Firmware                5.1.1

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.1.24.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.1.54790
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.1.54790
** TRION DRV:                      5.1.1.54790

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** MSI:
   - MSI2-STG, no balance action possible on CB16

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-04 Release Notice DEWETRON TRIONet Firmware R5.1.1

* Version:     5.1.1.54790 (Rev.: e87e644d4f9c0dcd4727c174d822d44c42e26f67)

* Components:
** TRIONet Firmware                5.1.1

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.1.24.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.1.54790
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.1.54790
** TRION DRV:                      5.1.1.54790

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** MSI:
   - MSI2-STG, no balance action possible on CB16

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-05-04 Release Notice DEWETRON TRIONet Firmware R5.1.1

* Version:     5.1.1.54790 (Rev.: e87e644d4f9c0dcd4727c174d822d44c42e26f67)

* Components:
** TRIONet Firmware                5.1.1

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.1.24.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.1.54790
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.1.54790
** TRION DRV:                      5.1.1.54790

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* Fixes:
** MSI:
   - MSI2-STG, no balance action possible on CB16

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-30 Release Notice DEWETRON TRIONet Firmware R5.1.0

* Version:     5.1.0.54545 (Rev.: 7373b978a8e44dd4179421a0022bbcd89311de93)

* Components:
** TRIONet Firmware                5.1.0

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.0.22.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.0.54545
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.0.54545
** TRION DRV:                      5.1.0.54545

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0023
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-30 Release Notice DEWETRON TRIONet Firmware R5.1.0

* Version:     5.1.0.54545 (Rev.: 7373b978a8e44dd4179421a0022bbcd89311de93)

* Components:
** TRIONet Firmware                5.1.0

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.0.22.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.0.54545
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.0.54545
** TRION DRV:                      5.1.0.54545

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0023
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2020-03-30 Release Notice DEWETRON TRIONet Firmware R5.1.0

* Version:     5.1.0.54545 (Rev.: 7373b978a8e44dd4179421a0022bbcd89311de93)

* Components:
** TRIONet Firmware                5.1.0

* Files:
** TRIONet USB stick image:        trionet_update_stick_image_5.1.0.22.img.zip
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.3
** Server:                         5.1.0.54545
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.1.0.54545
** TRION DRV:                      5.1.0.54545

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0063
** TRION-1810-HV-8              FW: x0063
** TRION-1820-POWER-4           FW: x0063
** TRION-1810M-POWER-4          FW: x0063
** TRION-1820-MULTI-4-D         FW: x0023
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
2019-12-20 Release Notice DEWETRON TRIONet Firmware R5.0.0

* Version:     5.0.0.53690 (Rev.: a31926af007fedc71a0342960652ff2880f394a8)

* Components:
** TRIONet Firmware                5.0.0

* Files:
** TRIONet USB stick image:        trionet_create_stick_R5.0.0.img
** TRIONet image file:             image.img.gz
** TRIONet display file:           EEPROM.eep / InitialEEPROM.eep / TRION_Boot.hex / TRION_NET.hex

* TRIONet node info:
** OS:                             Yocto warrior-21.0.2
** Server:                         5.0.0.53690
** Firmware:                       4.0.0 (Rev.: 41120e8f51624320b5560e83138516c618d95b4d)
** TRION API:                      5.0.0.53690
** TRION DRV:                      5.0.0.53690

* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release

* New Features and most important bugfixes:
** TRIONet software update using web interface

* Known Limitations:
** None

* HW Support TRION modules:
** TRION-1620-ACC-6-BNC         FW: x0031
** TRION-1620-ACC-6-L1B         FW: x0031
** TRION-1620-LV-6-BNC          FW: x0031
** TRION-1620-LV-6-L1B          FW: x0031
** TRION-1603-LV-6-BNC          FW: x0A15
** TRION-1603-LV-6-L1B          FW: x0A15
** TRION-1603-LV-6-D25          FW: x0A15
** TRION-1600-dLV-16-D          FW: x1891
** TRION-1600-dLV-16-D-CAN      FW: x1891
** TRION-1600-dLV-32-D          FW: x1891
** TRION-1600-dLV-32-D-CAN      FW: x1891
** TRION-1802-dLV-16-D          FW: x1891
** TRION-1802-dLV-16-D-CAN      FW: x1891
** TRION-1802-dLV-32-D          FW: x1891
** TRION-1802-dLV-32-D-CAN      FW: x1891
** TRION-1810-HV-4              FW: x0062
** TRION-1810-HV-8              FW: x0062
** TRION-1820-POWER-4           FW: x0062
** TRION-1810M-POWER-4          FW: x0062
** TRION-1820-MULTI-4-D         FW: x0022
** TRION-2402-MULTI-4-D         FW: x0B18
** TRION-2402-MULTI-8-L0B       FW: x0A24
** TRION-2402-MULTI-S1          FW: x0034
** TRION-2402-dSTG-6-L1B        FW: x1120
** TRION-2402-dSTG-6-L1B-S1     FW: x1120
** TRION-2402-dSTG-8-D          FW: x1120
** TRION-2402-dSTG-8-L0B        FW: x1120
** TRION-2402-dSTG-8-RJ         FW: x1120
** TRION-2400-dSTG-8-L0B        FW: x1120
** TRION-2400-dSTG-OEM          FW: x1120
** TRION-2402-dACC-6-BNC        FW: x1119
** TRION-2402-dACC-8-SMB        FW: x1119
** TRION-2402-dACC-8-MD         FW: x1119
** TRION-2402-V-4-B             FW: x1017
** TRION-2402-V-8-B             FW: x1017
** TRION-CNT-6-L1B              FW: x1119
** TRION-BASE                   FW: x1145
** TRION-TIMING                 FW: x1145
** TRION-TIMING-V2              FW: x0004
** TRION-TIMING-V3              FW: xF016   MCU: x00020080
** TRION-VGPS-20                FW: x1145
** TRION-VGPS-20-V3             FW: xF016   MCU: x00020080
** TRION-VGPS-100               FW: x1145
** TRION-VGPS-100-V3            FW: xF016   MCU: x00020080
** TRION-CAN-4                  FW: x1122
** TRION-CAN-2                  FW: x1122
** TRION-DI-48                  FW: x1119
** TRION-DI-64-S1               FW: x0009