## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.5.1.8543
DEWETRON TRION API | 7.5.1.8543
DEWETRON TRION driver | 7.5.1.8543
DEWETRON DEWE2 driver | 7.5.1.8543
## Files
DEWETRON-TRION-Applications-7.5.1.8543.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.5.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* Fixed an justage error with TRION-2402-dACC board (internal)
## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.5.1.8543
DEWETRON TRION API | 7.5.1.8543
DEWETRON TRION driver | 7.5.1.8543
DEWETRON DEWE2 driver | 7.5.1.8543
## Files
DEWETRON-TRION-Applications-7.5.1.8543.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.5.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* Fixed an justage error with TRION-2402-dACC board (internal)
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
DEWETRON Issues and Errata
(IssuesAndErrata.pdf - 208 KB) md5: c67d810da3a3374128abd457dc0abdd1
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Dewetron Explorer
* New X icon, better dark mode, splashscreen
* Improved network configuration
* Added set to default (default static, default dhcp)
* Allow configuration even if ip seetings do not match (TRIONet, NEXDAQ)
* CAN-FD bittiming added
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Dewetron Explorer
* New X icon, better dark mode, splashscreen
* Improved network configuration
* Added set to default (default static, default dhcp)
* Allow configuration even if ip seetings do not match (TRIONet, NEXDAQ)
* CAN-FD bittiming added
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.1.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
## Known Limitations
* NEX[DAQ]-1000 simulation does not support sample rate divider
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.1.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
## Known Limitations
* NEX[DAQ]-1000 simulation does not support sample rate divider
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Known Limitations
* None
(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Zip
(DEWETRON TRION R6.7.1.zip - 194.21 MB) md5: 62743ffddad6f659135616521e591b68
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
* Fixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* Fixes:
** MSI:
- MSI2-STG, no balance action possible on CB16
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.2 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI:
- Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
- Added encoder counter mode
** CB16
- MSI not correctly detected when EPADS are used
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.3 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** PUREC-50 and PUREC-200 support added
** Dark Mode available for DEWETRON Explorer
** Dark Mode available for DEWETRON TRIONCAL
** Selftest for all CAN devices
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.3 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** PUREC-50 and PUREC-200 support added
** Dark Mode available for DEWETRON Explorer
** Dark Mode available for DEWETRON TRIONCAL
** Selftest for all CAN devices
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI
- Fix for CAN delay issue with FW 0x0033
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI
- Fix for CAN delay issue with FW 0x0033
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed slot 3 issues
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed slot 3 issues
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Requirements:
** Windows 10 64-Bit or Windows 11 64-Bit
** NI LabVIEW 2018 or higher (32 bit and 64 bit)
** DEWETRON-TRION-Applications-7.4.2.7598 or higher
* Installation procedure
** Can be installed by using LabVIEW Package Manager
* Description
** Native LabVIEW driver for TRION & TRION3 modules
** Documentation included in the source code
** Dedicated functions included in separate VIs for hardware configuration
** Programming examples for different use cases included
** Supports TRION & TRION3 modules in DEWE2 (incl. TRIONet(3)) & DEWE3 chassis
** Supports one or several NEX[DAQ] connected via USB or Ethernet
** Synchronization via internal DEWE2/DEWE3 chassis clock
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O
** Synchronization of several NEXD[DAQ] via PTP
** Supported Channel types:
*** Analog inputs (AI)
*** Analog outputs (AO)
*** Digital inputs (DI)
*** Digital outputs (DO)
*** Counter inputs (CNT)
*** CAN message receive
*** CAN message decode (for LabVIEW 32 bit)
*** Recognition of MSIs & SUB modules
* Known Limitations
** External Synchronization signals not supported
** Maximum tested data rate: 200 MB/s (corresponds to 48 AI á 1 MS/s á 24 bit)
** NEX[DAQ] limitation in daisy-chain wiring: 100 MB/s max. data rate
** CAN-FD on NEX[DAQ]
** CAN message decode (for LabVIEW 64 bit due to missing LabVIEW library)
** CAN output
* Changes from v0.0.0.14 to v0.0.0.23
** Support and synchronization of several NEX[DAQ] via PTP
** Bugfixing for MSI support with NEX[DAQ] and TRION(3)-MULTI
* Changes from v0.0.0.13 to v0.0.0.14
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O added
* Changes from v0.0.0.8 to v0.0.0.13
** New supported channel types:
*** Analog outputs (AO)
*** Digital outputs (DO)
*** CAN message receive
*** CAN message decode (for LabVIEW 32 bit)
** TRIONet supported
* Changes from v0.0.0.7 to v0.0.0.8
** If-1 is entered for ShuntResistance the Parameter won't be set
** The number format has now also been set to a point as a decimal separator for the InputOffset
** Only integer values can now be entered for ShuntResistance