## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Software Zero Button was missing in channel list.
## Known Limitations
* Bridge balancing on Nex[DAQ] not working if userscaling is used
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Software Zero Button was missing in channel list.
## Known Limitations
* Bridge balancing on Nex[DAQ] not working if userscaling is used
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Software Zero Button was missing in channel list.
## Known Limitations
* Bridge balancing on Nex[DAQ] not working if userscaling is used
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Software Zero Button was missing in channel list.
## Known Limitations
* Bridge balancing on Nex[DAQ] not working if userscaling is used
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Software Zero Button was missing in channel list.
## Known Limitations
* Bridge balancing on Nex[DAQ] not working if userscaling is used
## Requirements
* 7.x Software License required!
* OS:
* Ubuntu 22.04
* Red Hat Enterprise Linux 8.x
* Red Hat Enterprise Linux 9.x
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
## Fixes
* Software Zero Button was missing in channel list.
## Requirements
* 7.x Software License required!
* OS:
* Ubuntu 22.04
* Red Hat Enterprise Linux 8.x
* Red Hat Enterprise Linux 9.x
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
## Fixes
* Software Zero Button was missing in channel list.
## Requirements
* 7.x Software License required!
* OS:
* Ubuntu 22.04
* Red Hat Enterprise Linux 8.x
* Red Hat Enterprise Linux 9.x
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
## Fixes
* Software Zero Button was missing in channel list.
DEWETRON Issues and Errata
(IssuesAndErrata.pdf - 195 KB) md5: f159af43bcd4474ade61fde4981e6bd5
* Installation procedure:
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
** Power instrument
- Fixed NaN displays in power instrument when opening a DMD
** XCP
- Fixed a memory leak
** Oxygen SDK
- QML Sandbox fixed reload
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Offline POWER Analysis
- Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
- Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
- Support for TRION-MIL (PMC-1553)
- MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
- Support of new TRION3 Board
- Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
- Show optional harmonic cursors in FFT
- Switch between Hz and CPM x-Axis
** CAN Channel Picker
- Option to show only active messages
** CAN DBC Parser
- More advanced fault tolerance and error reporting
** New features in Python Framework for future use
- User Input Dialog
** MSI2-600-V
- Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
- Load external recorded Video (e.g. HS-Video) in Analysis Mode
- Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
- Create a screen capturing of the measurement screen
- Select Framerate, Quality and Speed
** Setup Configuration Lock
- Lock Configuration on Setup load to avoid manipulation
- Select between different areas of lock
- Unlock with Password
** Power Analysis
- d/q Analysis for use with Synchronous Machines / BLDC
- Harmonic Table view
** New Data Export Formats
- NI Diadem DAT Export .dat
- DynaWorks Neutral File .nt
** Additional SCPI Commands
- Check Sync State
- Create and modify header data
** Reworked Filename Composer
- Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
- Adjustable Line Width in Recorder and Spectrum Analyzer
- Adaptive Linking of Recorders
- Adjustment of X-Tick Labels in Recorder
- Three size options for labels in Reporting pages
- Resizable Sidebars
- Recorder Mouse Label (activate in Recorder Settings)
- Prompt Header after Measurement Stop
** Additional Features
- h264 Encoder for Video
- Bayer Data Format for GIGE-Camera (reduce data transfer)
- Adjustable Playback Speed
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
- Plugins written with the OXYGEN SDK can now be used also offline
- e.g. ARINC and MIL-STD Plugins or your own
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TRION3-AOUT-8
- Added FileReplay support
** USB-Webcams
- Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
- Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
- Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
- Correctly visualize panel in overview
** Counter channels:
- Enabled PulswWidth mode
** OXYGEN-NET
- Fix for a potential crash when using custom file name patterns
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TEDS Support:
- Detection of IEEE 1451.4 compatible sensors (selection)
- Apply of scaling and mode of measurement input
- Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
- Native Support of CPAD2/3 Modules
** ARXML support for CAN:
- Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
- Enable the user to manually select the TRIONet for measurement
- Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
- Use Numeric Header data in Formula
- Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
- Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
- Kml-track data can be used as
center, left or right boundary of lane
** Additional Improvements:
- New Storing Option: Stop measurement after... additional to Pause
- Increase Pre-Time and Freeze time up to 60 seconds
- Manual (Recording)-Trigger via GUI or SCPI
- File Name pattern, user defined counter offset
- Formula Channels can now be also grouped
- Navigate thru channel list with CTRL+PAGE UP/DOWN
- Increased sensitivity of power flicker emission calculation
* Fixes:
- Update of Graphic Framework to avoid screen flickering on intel graphics
- CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
- Error Message regarding Oversampling @ Setup loading
- Problem with ACQ-Start with no channel Enabled on first DAQ Board
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed user scaling when loading setups using TRION-2402-V boards
- Changed TRIONet claim default setting to "Auto claim USB"
- Fixed modbus plugin dialog
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed a crash when UI elements from plugins are drawn
- Qt memory leak fix
- Fixed high memory consumption of the video instrument
- Fixed invalid formulas on async channels
- Fixed a crash when loading a complex modbus setup
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Power: improved accuracy of RMS value calculation
- Matrix Sampler: fixed high memory usage
- CPAD: fixed crash when accessing removed devices
- Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
- Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
- Needs TRION API 5.6.3 or better
- Added support for TRION3-1820-POWER
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN Updates
- New CAN detail setup for editing messages and signals
- OBD-II plugin
** New calculation plugin
- Frequency Measurement for periodical signals (0 ... 5000Hz)
** Export features
- HDF5 export plugin
- Excel export split data into multiple spreadsheets
- Fill gabs in TXT, CSV and Excel plugin
** New devices:
- EPAD3-TH8
** User Experience Improvements:
- Event list shows date
- Reset statistics on measurement start
Fixes:
* POWER
- accuracy improvements for low sample rate measurements
* TEDS Support:
- Support for older sensors
* Table scaling
- extrapolation for out of range values
* Advanced graphics
- Support for different Graphic APIs to fix issues when using
Windows Remote Desktop
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple dmd-files at once (step 1: only for OXYGEN-NET measurements)
- Batch export - Export multiple dmd-files at once
- Batch process dmd-files - Apply changes from one dmd-file to others
- Revert changes in dmd-files - go back to different save steps
** Array Math
- Process array-type channels (e.g. Power Harmonics) in Formula channels, support slicing
- Use array-type channels in statistic calculation
** Video
- Support of AVT Alvium series
- Rotate Video picture
** Power
- Option for relative harmonic (and interharmonic) channels (additional to absolute values), _hREL, _ihREL
- Option to synchronize the basic calculation interval to harmonic calculation interval
** Export
- New export format *.uff (Universal file format 58 & 58B)
* Improvements
** OXYGEN-NET
- Faster handling of property changes
- Faster claiming of nodes
- Faster loading of setup
** CPB Spectrum
- Analysis up to 500 kHz is possible
** CAN-OUT
- array-type channels can be used as source channel, just provide array index
** Setup & Settings
- Separate "Setup" Settings -> stored in *.dms-file
- Separate "System" Setting -> System wide Settings, independent from dms
* Fixes:
** Offline Calculation
- changes of FFT-window size lead to crash
** Data-Stream
- fixed memory leak when using low-samplerate channels
* Known Limitations
- Maximum 120 fps camera stream
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.0.1)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Fixes:
** Stability
- Fixed issue that let to qml engine memory corruption
** Setup Load
- Fixed crash on DMS load when channels do not match the current system
* Instruments
- Statistic data is not displayed in digital meter in Oxygen
** Export
- Fix TXT export statistics settings
- Fix export validation if only statistic or waveform property is available
- Fix for deactivated RPC III export
** SCPI
- Fix error return for EXPORT:AUTO ON|OFF command
** Camera
- Allow higher h264 bitrate for High-Res/High-FPS video
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.0)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple DMD files from different measurements
** Scaling
- Polynomial Scaling added
** Exports
- New Famos export (imc2)
- New TDMS export
** Demo Licenses
- License with expiration date
** Automatically open DMD after measurement
* Improvements
** CAN
- Scan for messages added
- ENUM Scaling support
** IRIG-OUT
- Implemented for TIMING-V3
** POWER
- Additional calculations (Ah,Z)
** SCPI
- NUM:VAL also in BINARY Format
** Statistics
- Additional Calculations
- Overlap Calculation
- Overall Calculation
** Trigger
- Post time feature
* Fixes
- Installation using SYSTEM account now possible
- CSV Export fixed
- Digital Out channels have correct value after loading DMS
- GPS instrument: OpenStreetMap maps download works
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.1.1.61822
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i5 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed wrong white on white rendering with Oxygen classic style
- Installation using SYSTEM account fixed
- Snapshot fixed an issue when the set interval was not applied correctly
- Order Analysis performance improvement
- Stability
- Frequency Measurement: Fixed Oxygen crash on >2MS boards
- Fix crash due to channel without timebase in audio player instrument
- Fix crash with Stop measurement trigger
- Fix crash when using spectrum analyzer and multiple file open
- Fix spurious crash when opening splitted DMD files
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.2.1.62584
## Files
DEWETRON_Oxygen_Setup_R6.2.1_x64.exe
DEWETRON_Oxygen_Setup_R6.2.1_x64_cvss.exe (no Python scripting)
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Data Navigation
- Import CSV files in analysis
- "Save As" allows to remove channel data from DMD files
- Advanced Statistics
- Triggered Statistics - calculate on trigger events
- Running Statistics - running statistics on given window for sync channels
- Hardware: XR Series
- Support for RS485 and CAN Mode
- Export DBC file in CAN Mode
- NetCDF Export
- Network Common Data Form support (NetCDF3, NetCDF4, NetCDF5)
- CVSS installer without embedded Python
## Improvements
- Power:
- Accumulate current signals for capacity computation
- User Experience
- Added error list
- "Selection" header type support
- Recorder allows up to 40 channels
- Multi select instruments to edit properties
- Hardware mismatch dialog can be forced
- XY Chart
- Multiple traces with shared X-Y axis
- DMD Reader
- Added functions to read measurement setup (xml)
- FFT
- Added FFT Averaging
- Enum Scaling
- Available for formular channels
- Exports
- Added align to trigger
## Fixes
- Fixed memory leak in split file video recording with h.264 on Intel hardware
- Memory consumption reduced for long-time recordings
- Power: flicker emission is computed more accurately
- TEDS: Fixed issue with accelerometer sensor
- Frequency measurement: Fixed crash with high sample rates (>2MS)
- ARXML: Fixed issue showing channels as other channels
- Excel Export:
- Fixed missing reduced samples
- Fixed user reduced channel names in
- CVS Import: Fixed handling of unicode paths
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.3.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fix MSI Installer packages missing OpenMP libraries
- Fix performance issue with OpenMP after installation
- Fix spelling errors in DE translation
- Fix FIR showing total delay and compensable delay
- Fix a crash caused by a missing timebase
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Improvements
- XCP - Arm Measurement option
- Vimba/GigE Camera Support for Linux
## Fixes
- Prevent crash on recording stop
- Fixed cancel in channel selection dialog
- Fixed calculation of time trigger
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed claiming of TRIONet in combination with Oxygen Net
- Fixed Oxygen Net nodes will not be recognized automatically when starting a preconfigured setup on the master
- Fixed crash when editing a DMD file
- Fixed storing to file paths using german umlauts
- Fixed trigger condition preview collapsing on sidebar close/open
- Fixed support for Alvium USB3 cameras with newest firmware
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.5.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Sensor DB: Fixed setting scaling
- Array instrument: Fixed x axis value not readable
- Oxygen: Fixed file icons for encoded paths
- TEDS: Apply prerequisites mode first before evaluation range-constraints
- Excel V2: Fixed align 0-time to trigger not used correctly
- Excel V2: Fixed channel missing on OVERALL sheet
- Oxygen NET: Fixed set scaling factor/offset in multi channel selection
- CSV import: Remove NaN for timeshifted sync data
- Oxygen: Fixed wrong statistics window shown in individual channel config
- Power: Fixed recording start handling in power module preventing offline calculation start
- MILSTD: Fixed decoding crash
- XR: Fixed issue when adding XR/CPAD modules
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* NEX[DAQ]-200 device support
* Basic support for synchronization of multiple devices
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
## Fixes
* Power Module
* Fix for U_fluc_td computation using sub-sample accuracy
* Fix a crash when assigning channels via plus button
* Fix for calculation in input channels with timebase offset
* Show error if a input channel becomes incompatible
* OXYGEN-NET
* Fixed a crash on when disconnecting/connecting a node
* SCPI
* ELOG: Fix reset on acquisition restart
* CVS Import
* Fix for an issue when some imported data was missing
* Fixed a timeshift issue
* DATX Export
* Added additional information dor speed sensors
* Saturation
* Fixed saturation calculation with scaling parameters
* Offline
* Added progress aware scheduler for calculations to prevent high RAM usage
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed SplitView appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Fixed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.0.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed SplitView appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Fixed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN Updates
- New CAN detail setup for editing messages and signals
- OBD-II plugin
** New calculation plugin
- Frequency Measurement for periodical signals (0 ... 5000Hz)
** Export features
- HDF5 export plugin
- Excel export split data into multiple spreadsheets
- Fill gabs in TXT, CSV and Excel plugin
** New devices:
- EPAD3-TH8
** User Experience Improvements:
- Event list shows date
- Reset statistics on measurement start
Fixes:
* POWER
- accuracy improvements for low sample rate measurements
* TEDS Support:
- Support for older sensors
* Table scaling
- extrapolation for out of range values
* Advanced graphics
- Support for different Graphic APIs to fix issues when using
Windows Remote Desktop
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple dmd-files at once (step 1: only for OXYGEN-NET measurements)
- Batch export - Export multiple dmd-files at once
- Batch process dmd-files - Apply changes from one dmd-file to others
- Revert changes in dmd-files - go back to different save steps
** Array Math
- Process array-type channels (e.g. Power Harmonics) in Formula channels, support slicing
- Use array-type channels in statistic calculation
** Video
- Support of AVT Alvium series
- Rotate Video picture
** Power
- Option for relative harmonic (and interharmonic) channels (additional to absolute values), _hREL, _ihREL
- Option to synchronize the basic calculation interval to harmonic calculation interval
** Export
- New export format *.uff (Universal file format 58 & 58B)
* Improvements
** OXYGEN-NET
- Faster handling of property changes
- Faster claiming of nodes
- Faster loading of setup
** CPB Spectrum
- Analysis up to 500 kHz is possible
** CAN-OUT
- array-type channels can be used as source channel, just provide array index
** Setup & Settings
- Separate "Setup" Settings -> stored in *.dms-file
- Separate "System" Setting -> System wide Settings, independent from dms
* Fixes:
** Offline Calculation
- changes of FFT-window size lead to crash
** Data-Stream
- fixed memory leak when using low-samplerate channels
* Known Limitations
- Maximum 120 fps camera stream
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* NEX[DAQ]-200 device support
* Basic support for synchronization of multiple devices
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
## Fixes
* Power Module
* Fix for U_fluc_td computation using sub-sample accuracy
* Fix a crash when assigning channels via plus button
* Fix for calculation in input channels with timebase offset
* Show error if a input channel becomes incompatible
* OXYGEN-NET
* Fixed a crash on when disconnecting/connecting a node
* SCPI
* ELOG: Fix reset on acquisition restart
* CVS Import
* Fix for an issue when some imported data was missing
* Fixed a timeshift issue
* DATX Export
* Added additional information dor speed sensors
* Saturation
* Fixed saturation calculation with scaling parameters
* Offline
* Added progress aware scheduler for calculations to prevent high RAM usage
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* NEX[DAQ]-200 device support
* Basic support for synchronization of multiple devices
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
## Fixes
* Power Module
* Fix for U_fluc_td computation using sub-sample accuracy
* Fix a crash when assigning channels via plus button
* Fix for calculation in input channels with timebase offset
* Show error if a input channel becomes incompatible
* OXYGEN-NET
* Fixed a crash on when disconnecting/connecting a node
* SCPI
* ELOG: Fix reset on acquisition restart
* CVS Import
* Fix for an issue when some imported data was missing
* Fixed a timeshift issue
* DATX Export
* Added additional information dor speed sensors
* Saturation
* Fixed saturation calculation with scaling parameters
* Offline
* Added progress aware scheduler for calculations to prevent high RAM usage
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed SplitView appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Fixed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN-FD
- Set Samplepoint and advanced timing parameter
* Fixes:
** Common:
- OXYGEN crashes when switching AI to CAN
** Export:
- XLSX-Export have wrong output format (text instead of value)
** MSI:
- MSI2-STG, no balance action possible on CB16
- MSI2-STG, bridge factor missing in settings
** Intensity Diagram:
- Scaling broken after changes of channel settings
** Spectrum Analyzer:
- Phase channel is not rendered correctly
** Snapshot Channels:
- Sporadic NaN values when using aggregation (e.g. AVG)
** TRION-POWER:
- SUB-Modules have ranges with wrong scaling
** SCPI:
- Command STORE:FILE:NAME not applicable
- Command :NUM:DIMS? does not report the right sample dimension
** XCP:
- Use of same Oxygen setup leads to different A2L-file
- A2L-file contains non usable channels (e.g. Power Group Channel)
- Connect/Disconnect sometimes lead to deadlock of Oxygen
- adapt visible names in A2L for better compatiblity with CANoe
- Improved stability
* Changes:
** Power:
- channel's samplerate for mechanical power must be less or equal to U/I channels
** FFT:
- FFT-Group channel (complex) is not stored by default
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** Channel-wise sample rate selector
- Set individual sampling rates on the same board
- Auto-Adjust of AAF
** Advanced storing modes
- individual storing settings per channel
- including skip mode for sample rate switch emulation
- show "Statistics" data in all instruments
** Efficiency Map (Matrix Sampler)
- Calculation Module for matrix sampling (X-Y -> Z)
- used for efficiency map creation (matrix channel)
- including interpolation in intensity diagram
- requires OXY-OPT-POW-ADV
** Soundlevel Meter
- Calculation module for sound level determination
- A/B/C/D/Z frequency weighting
- slow, fast, impulse time weighting
- interval and continous mode
* Fixes:
** Export:
- Fixed Acquisition Problems after AUTO-Export
- Lower the MATLAB Compressed Export duration by 80%
- MDF4: Export did not contain any data, if a CAN Message was selected
** CAN:
- Fixed Problems with CAN-OUT at high data rate
- DBC-Parser now can move on with DLC mismatch
- J1939: Ignore priority and source address (if defined as 0xFE) in message id
** OXYGEN NET:
- Fixed Memory increase in case of deactivating the statistics storage
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** ARINC-429 (Altadt)
- Support for TRION-ARINC (PMC-429)
- A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
- Octave, third octave or twelfth octave band resolution according to EN61260
- Amplitude or decibel spectrum
- Array chart instrument
** Audio replay
- Audio replay instrument
** FFT reference curves
- available in spectrum analyzer
** New export formats
- WAV export
- RPCIII export
** Improved digital instrument
- improved layout
- configureable minimum digits and automatic unit prefix
** SCPI
- Improved setup load (async)
** PUREC device support
- Chassis visualization added
- MSI displayed in channel overview
* Channel list
- Width is now individually adjustable
* Settings:
- New Amplifier / RS232 / RS485 page
- Configure serial ports without a restart
* OXYGEN SDK
- Export plugin extensions
* Fixes:
** Improved MATLAB export
- Faster Compressed export
- No interval split
** Improved EXPORT interface
- Faster interface for 1000+ channels
** Improved CAN-OUT
- Driver issues limit CAN-OUT to less than 700 messages per second
- If this limit is exceeded, older messages get automatically dropped
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** ARINC-429 (Altadt)
- Support for TRION-ARINC (PMC-429)
- A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
- Octave, third octave or twelfth octave band resolution according to EN61260
- Amplitude or decibel spectrum
- Array chart instrument
** Audio replay
- Audio replay instrument
** FFT reference curves
- available in spectrum analyzer
** New export formats
- WAV export
- RPCIII export
** Improved digital instrument
- improved layout
- configureable minimum digits and automatic unit prefix
** SCPI
- Improved setup load (async)
** PUREC device support
- Chassis visualization added
- MSI displayed in channel overview
* Channel list
- Width is now individually adjustable
* Settings:
- New Amplifier / RS232 / RS485 page
- Configure serial ports without a restart
* OXYGEN SDK
- Export plugin extensions
* Fixes:
** Improved MATLAB export
- Faster Compressed export
- No interval split
** Improved EXPORT interface
- Faster interface for 1000+ channels
** Improved CAN-OUT
- Driver issues limit CAN-OUT to less than 700 messages per second
- If this limit is exceeded, older messages get automatically dropped
* Installation procedure:
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
** Power instrument
- Fixed NaN displays in power instrument when opening a DMD
** XCP
- Fixed a memory leak
** Oxygen SDK
- QML Sandbox fixed reload
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Offline POWER Analysis
- Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
- Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
- Support for TRION-MIL (PMC-1553)
- MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
- Support of new TRION3 Board
- Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
- Show optional harmonic cursors in FFT
- Switch between Hz and CPM x-Axis
** CAN Channel Picker
- Option to show only active messages
** CAN DBC Parser
- More advanced fault tolerance and error reporting
** New features in Python Framework for future use
- User Input Dialog
** MSI2-600-V
- Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
- Load external recorded Video (e.g. HS-Video) in Analysis Mode
- Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
- Create a screen capturing of the measurement screen
- Select Framerate, Quality and Speed
** Setup Configuration Lock
- Lock Configuration on Setup load to avoid manipulation
- Select between different areas of lock
- Unlock with Password
** Power Analysis
- d/q Analysis for use with Synchronous Machines / BLDC
- Harmonic Table view
** New Data Export Formats
- NI Diadem DAT Export .dat
- DynaWorks Neutral File .nt
** Additional SCPI Commands
- Check Sync State
- Create and modify header data
** Reworked Filename Composer
- Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
- Adjustable Line Width in Recorder and Spectrum Analyzer
- Adaptive Linking of Recorders
- Adjustment of X-Tick Labels in Recorder
- Three size options for labels in Reporting pages
- Resizable Sidebars
- Recorder Mouse Label (activate in Recorder Settings)
- Prompt Header after Measurement Stop
** Additional Features
- h264 Encoder for Video
- Bayer Data Format for GIGE-Camera (reduce data transfer)
- Adjustable Playback Speed
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
- Plugins written with the OXYGEN SDK can now be used also offline
- e.g. ARINC and MIL-STD Plugins or your own
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TRION3-AOUT-8
- Added FileReplay support
** USB-Webcams
- Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
- Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
- Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
- Correctly visualize panel in overview
** Counter channels:
- Enabled PulswWidth mode
** OXYGEN-NET
- Fix for a potential crash when using custom file name patterns
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TEDS Support:
- Detection of IEEE 1451.4 compatible sensors (selection)
- Apply of scaling and mode of measurement input
- Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
- Native Support of CPAD2/3 Modules
** ARXML support for CAN:
- Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
- Enable the user to manually select the TRIONet for measurement
- Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
- Use Numeric Header data in Formula
- Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
- Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
- Kml-track data can be used as
center, left or right boundary of lane
** Additional Improvements:
- New Storing Option: Stop measurement after... additional to Pause
- Increase Pre-Time and Freeze time up to 60 seconds
- Manual (Recording)-Trigger via GUI or SCPI
- File Name pattern, user defined counter offset
- Formula Channels can now be also grouped
- Navigate thru channel list with CTRL+PAGE UP/DOWN
- Increased sensitivity of power flicker emission calculation
* Fixes:
- Update of Graphic Framework to avoid screen flickering on intel graphics
- CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
- Error Message regarding Oversampling @ Setup loading
- Problem with ACQ-Start with no channel Enabled on first DAQ Board
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed user scaling when loading setups using TRION-2402-V boards
- Changed TRIONet claim default setting to "Auto claim USB"
- Fixed modbus plugin dialog
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed a crash when UI elements from plugins are drawn
- Qt memory leak fix
- Fixed high memory consumption of the video instrument
- Fixed invalid formulas on async channels
- Fixed a crash when loading a complex modbus setup
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Power: improved accuracy of RMS value calculation
- Matrix Sampler: fixed high memory usage
- CPAD: fixed crash when accessing removed devices
- Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
- Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
- Needs TRION API 5.6.3 or better
- Added support for TRION3-1820-POWER
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN Updates
- New CAN detail setup for editing messages and signals
- OBD-II plugin
** New calculation plugin
- Frequency Measurement for periodical signals (0 ... 5000Hz)
** Export features
- HDF5 export plugin
- Excel export split data into multiple spreadsheets
- Fill gabs in TXT, CSV and Excel plugin
** New devices:
- EPAD3-TH8
** User Experience Improvements:
- Event list shows date
- Reset statistics on measurement start
Fixes:
* POWER
- accuracy improvements for low sample rate measurements
* TEDS Support:
- Support for older sensors
* Table scaling
- extrapolation for out of range values
* Advanced graphics
- Support for different Graphic APIs to fix issues when using
Windows Remote Desktop
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple dmd-files at once (step 1: only for OXYGEN-NET measurements)
- Batch export - Export multiple dmd-files at once
- Batch process dmd-files - Apply changes from one dmd-file to others
- Revert changes in dmd-files - go back to different save steps
** Array Math
- Process array-type channels (e.g. Power Harmonics) in Formula channels, support slicing
- Use array-type channels in statistic calculation
** Video
- Support of AVT Alvium series
- Rotate Video picture
** Power
- Option for relative harmonic (and interharmonic) channels (additional to absolute values), _hREL, _ihREL
- Option to synchronize the basic calculation interval to harmonic calculation interval
** Export
- New export format *.uff (Universal file format 58 & 58B)
* Improvements
** OXYGEN-NET
- Faster handling of property changes
- Faster claiming of nodes
- Faster loading of setup
** CPB Spectrum
- Analysis up to 500 kHz is possible
** CAN-OUT
- array-type channels can be used as source channel, just provide array index
** Setup & Settings
- Separate "Setup" Settings -> stored in *.dms-file
- Separate "System" Setting -> System wide Settings, independent from dms
* Fixes:
** Offline Calculation
- changes of FFT-window size lead to crash
** Data-Stream
- fixed memory leak when using low-samplerate channels
* Known Limitations
- Maximum 120 fps camera stream
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.0.1)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Fixes:
** Stability
- Fixed issue that let to qml engine memory corruption
** Setup Load
- Fixed crash on DMS load when channels do not match the current system
* Instruments
- Statistic data is not displayed in digital meter in Oxygen
** Export
- Fix TXT export statistics settings
- Fix export validation if only statistic or waveform property is available
- Fix for deactivated RPC III export
** SCPI
- Fix error return for EXPORT:AUTO ON|OFF command
** Camera
- Allow higher h264 bitrate for High-Res/High-FPS video
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.0)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple DMD files from different measurements
** Scaling
- Polynomial Scaling added
** Exports
- New Famos export (imc2)
- New TDMS export
** Demo Licenses
- License with expiration date
** Automatically open DMD after measurement
* Improvements
** CAN
- Scan for messages added
- ENUM Scaling support
** IRIG-OUT
- Implemented for TIMING-V3
** POWER
- Additional calculations (Ah,Z)
** SCPI
- NUM:VAL also in BINARY Format
** Statistics
- Additional Calculations
- Overlap Calculation
- Overall Calculation
** Trigger
- Post time feature
* Fixes
- Installation using SYSTEM account now possible
- CSV Export fixed
- Digital Out channels have correct value after loading DMS
- GPS instrument: OpenStreetMap maps download works
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.0)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple DMD files from different measurements
** Scaling
- Polynomial Scaling added
** Exports
- New Famos export (imc2)
- New TDMS export
** Demo Licenses
- License with expiration date
** Automatically open DMD after measurement
* Improvements
** CAN
- Scan for messages added
- ENUM Scaling support
** IRIG-OUT
- Implemented for TIMING-V3
** POWER
- Additional calculations (Ah,Z)
** SCPI
- NUM:VAL also in BINARY Format
** Statistics
- Additional Calculations
- Overlap Calculation
- Overall Calculation
** Trigger
- Post time feature
* Fixes
- Installation using SYSTEM account now possible
- CSV Export fixed
- Digital Out channels have correct value after loading DMS
- GPS instrument: OpenStreetMap maps download works
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.1.1.61822
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i5 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed wrong white on white rendering with Oxygen classic style
- Installation using SYSTEM account fixed
- Snapshot fixed an issue when the set interval was not applied correctly
- Order Analysis performance improvement
- Stability
- Frequency Measurement: Fixed Oxygen crash on >2MS boards
- Fix crash due to channel without timebase in audio player instrument
- Fix crash with Stop measurement trigger
- Fix crash when using spectrum analyzer and multiple file open
- Fix spurious crash when opening splitted DMD files
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.2.1.62584
## Files
DEWETRON_Oxygen_Setup_R6.2.1_x64.exe
DEWETRON_Oxygen_Setup_R6.2.1_x64_cvss.exe (no Python scripting)
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Data Navigation
- Import CSV files in analysis
- "Save As" allows to remove channel data from DMD files
- Advanced Statistics
- Triggered Statistics - calculate on trigger events
- Running Statistics - running statistics on given window for sync channels
- Hardware: XR Series
- Support for RS485 and CAN Mode
- Export DBC file in CAN Mode
- NetCDF Export
- Network Common Data Form support (NetCDF3, NetCDF4, NetCDF5)
- CVSS installer without embedded Python
## Improvements
- Power:
- Accumulate current signals for capacity computation
- User Experience
- Added error list
- "Selection" header type support
- Recorder allows up to 40 channels
- Multi select instruments to edit properties
- Hardware mismatch dialog can be forced
- XY Chart
- Multiple traces with shared X-Y axis
- DMD Reader
- Added functions to read measurement setup (xml)
- FFT
- Added FFT Averaging
- Enum Scaling
- Available for formular channels
- Exports
- Added align to trigger
## Fixes
- Fixed memory leak in split file video recording with h.264 on Intel hardware
- Memory consumption reduced for long-time recordings
- Power: flicker emission is computed more accurately
- TEDS: Fixed issue with accelerometer sensor
- Frequency measurement: Fixed crash with high sample rates (>2MS)
- ARXML: Fixed issue showing channels as other channels
- Excel Export:
- Fixed missing reduced samples
- Fixed user reduced channel names in
- CVS Import: Fixed handling of unicode paths
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.3.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fix MSI Installer packages missing OpenMP libraries
- Fix performance issue with OpenMP after installation
- Fix spelling errors in DE translation
- Fix FIR showing total delay and compensable delay
- Fix a crash caused by a missing timebase
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Improvements
- XCP - Arm Measurement option
- Vimba/GigE Camera Support for Linux
## Fixes
- Prevent crash on recording stop
- Fixed cancel in channel selection dialog
- Fixed calculation of time trigger
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed claiming of TRIONet in combination with Oxygen Net
- Fixed Oxygen Net nodes will not be recognized automatically when starting a preconfigured setup on the master
- Fixed crash when editing a DMD file
- Fixed storing to file paths using german umlauts
- Fixed trigger condition preview collapsing on sidebar close/open
- Fixed support for Alvium USB3 cameras with newest firmware
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.5.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Sensor DB: Fixed setting scaling
- Array instrument: Fixed x axis value not readable
- Oxygen: Fixed file icons for encoded paths
- TEDS: Apply prerequisites mode first before evaluation range-constraints
- Excel V2: Fixed align 0-time to trigger not used correctly
- Excel V2: Fixed channel missing on OVERALL sheet
- Oxygen NET: Fixed set scaling factor/offset in multi channel selection
- CSV import: Remove NaN for timeshifted sync data
- Oxygen: Fixed wrong statistics window shown in individual channel config
- Power: Fixed recording start handling in power module preventing offline calculation start
- MILSTD: Fixed decoding crash
- XR: Fixed issue when adding XR/CPAD modules
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Power Group features
- Adaptions on Flicker
- Editable grid impedance angles
- D-Parameter evaluation
- Adaptions on Rolling Calculations
- Extended nominal frequency threshold 0..95%
- Power Harmonics
- New interpolation to cubic spline
- Better accuracy when low sample rates are used.
- AVT Alvium G1 and G5 series support
- Camera trigger support
- LAN data transfer
- Order Analysis
- Multiple speed directions
- Overall RMS channels
## Improvements
- Analog Meter instrument
- Optionally show digital value
- Spectrum Analyzer instrument
- Peak Hair cursor
- SCPI
- Query FIR Filter Transfer Function
- Array Chart instrument
- Interpolated Line display type
## Fixes
- Improvements when using DataStream on OXYGEN-NET master systems
- pyDmdReader
- Performance improvement for reading large datasets
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Power Group features
- Adaptions on Flicker
- Editable grid impedance angles
- D-Parameter evaluation
- Adaptions on Rolling Calculations
- Extended nominal frequency threshold 0..95%
- Power Harmonics
- New interpolation to cubic spline
- Better accuracy when low sample rates are used.
- AVT Alvium G1 and G5 series support
- Camera trigger support
- LAN data transfer
- Order Analysis
- Multiple speed directions
- Overall RMS channels
## Improvements
- Analog Meter instrument
- Optionally show digital value
- Spectrum Analyzer instrument
- Peak Hair cursor
- SCPI
- Query FIR Filter Transfer Function
- Array Chart instrument
- Interpolated Line display type
## Fixes
- Improvements when using DataStream on OXYGEN-NET master systems
- pyDmdReader
- Performance improvement for reading large datasets
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* NEX[DAQ]-200 device support
* Basic support for synchronization of multiple devices
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
## Fixes
* Power Module
* Fix for U_fluc_td computation using sub-sample accuracy
* Fix a crash when assigning channels via plus button
* Fix for calculation in input channels with timebase offset
* Show error if a input channel becomes incompatible
* OXYGEN-NET
* Fixed a crash on when disconnecting/connecting a node
* SCPI
* ELOG: Fix reset on acquisition restart
* CVS Import
* Fix for an issue when some imported data was missing
* Fixed a timeshift issue
* DATX Export
* Added additional information dor speed sensors
* Saturation
* Fixed saturation calculation with scaling parameters
* Offline
* Added progress aware scheduler for calculations to prevent high RAM usage
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed SplitView appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Fixed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* Fixes:
** GUI: Rendering of the channel mapping dialog took a long time.
** GUI: Cancelling the channel mapping dialog took a long time.
** GUI: Creation and adding a lot of channels to digital instruments was slow.
** Oxygen Net: High memory consumption on master and remote node.
** Oxygen Net: High cpu load with enabled gps channels.
** DAQP: DAQP modules could not be configured after loading a setup.
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** Vector FlexRay support
- Supports Fibex 2.0 to 4.1.2
- Decoding to individual signals with offline support
- Intuitive channel picker
** CAN-Offline decoding
- Intuitive channel picker
** File Browser
- Oxygen file browser is able to create new folders
- Oxygen file browser is able to use standard file explorer ("Browse..." button)
** Filesplit by absolute time
- Allows filesplits on rounded absolute time
** Array access in formula
- Access single array elements
** OXYGEN Viewer
- Review data files in parallel to a running Oxygen.
** Update of 6-Phase Calculation (Power)
- Changed 6P6W schematic to 2x3P3W.
** Oxygen SDK
- Improvements due to first reviews. More on GitHub (https://github.com/DEWETRON/OXYGEN-SDK)
** Oxygen GUI Improvements
- Channel list: Unused channel groups are automatically folded
- Channel list: Math formula editor now supports multiline edit
- Channel list: Simple channel type filter
- Improved tooltips
- Cursors can now be renamed (A/B cursor)
- Text instrument: Can display measurement time
* Fixes:
** Actions: Zero and Bridge Balance action on large systems
** Power:Crash with power group in special combinations with XCP
** Power: Crash when deleting power group on a special customer setup
** Trigger: Triggered recording: recording does not restart after resync
** Oxygen Net: High memory consumption when using Pause mode
** FFT: Fixed an invalid sign jump in the phase calculation
** EPAD/DAQP: Crash that may happens on module scans with invalid module addresses
** MSI: Fixed a scaling issue with MSI2-STG-5V, added missing Bridge Factor input field
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** Channel-wise sample rate selector
- Set individual sampling rates on the same board
- Auto-Adjust of AAF
** Advanced storing modes
- individual storing settings per channel
- including skip mode for sample rate switch emulation
- show "Statistics" data in all instruments
** Efficiency Map (Matrix Sampler)
- Calculation Module for matrix sampling (X-Y -> Z)
- used for efficiency map creation (matrix channel)
- including interpolation in intensity diagram
- requires OXY-OPT-POW-ADV
** Soundlevel Meter
- Calculation module for sound level determination
- A/B/C/D/Z frequency weighting
- slow, fast, impulse time weighting
- interval and continous mode
* Fixes:
** Export:
- Fixed Acquisition Problems after AUTO-Export
- Lower the MATLAB Compressed Export duration by 80%
- MDF4: Export did not contain any data, if a CAN Message was selected
** CAN:
- Fixed Problems with CAN-OUT at high data rate
- DBC-Parser now can move on with DLC mismatch
- J1939: Ignore priority and source address (if defined as 0xFE) in message id
** OXYGEN NET:
- Fixed Memory increase in case of deactivating the statistics storage
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** ARINC-429 (Altadt)
- Support for TRION-ARINC (PMC-429)
- A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
- Octave, third octave or twelfth octave band resolution according to EN61260
- Amplitude or decibel spectrum
- Array chart instrument
** Audio replay
- Audio replay instrument
** FFT reference curves
- available in spectrum analyzer
** New export formats
- WAV export
- RPCIII export
** Improved digital instrument
- improved layout
- configureable minimum digits and automatic unit prefix
** SCPI
- Improved setup load (async)
** PUREC device support
- Chassis visualization added
- MSI displayed in channel overview
* Channel list
- Width is now individually adjustable
* Settings:
- New Amplifier / RS232 / RS485 page
- Configure serial ports without a restart
* OXYGEN SDK
- Export plugin extensions
* Fixes:
** Improved MATLAB export
- Faster Compressed export
- No interval split
** Improved EXPORT interface
- Faster interface for 1000+ channels
** Improved CAN-OUT
- Driver issues limit CAN-OUT to less than 700 messages per second
- If this limit is exceeded, older messages get automatically dropped
* Installation procedure:
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
** Power instrument
- Fixed NaN displays in power instrument when opening a DMD
** XCP
- Fixed a memory leak
** Oxygen SDK
- QML Sandbox fixed reload
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Offline POWER Analysis
- Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
- Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
- Support for TRION-MIL (PMC-1553)
- MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
- Support of new TRION3 Board
- Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
- Show optional harmonic cursors in FFT
- Switch between Hz and CPM x-Axis
** CAN Channel Picker
- Option to show only active messages
** CAN DBC Parser
- More advanced fault tolerance and error reporting
** New features in Python Framework for future use
- User Input Dialog
** MSI2-600-V
- Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
- Load external recorded Video (e.g. HS-Video) in Analysis Mode
- Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
- Create a screen capturing of the measurement screen
- Select Framerate, Quality and Speed
** Setup Configuration Lock
- Lock Configuration on Setup load to avoid manipulation
- Select between different areas of lock
- Unlock with Password
** Power Analysis
- d/q Analysis for use with Synchronous Machines / BLDC
- Harmonic Table view
** New Data Export Formats
- NI Diadem DAT Export .dat
- DynaWorks Neutral File .nt
** Additional SCPI Commands
- Check Sync State
- Create and modify header data
** Reworked Filename Composer
- Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
- Adjustable Line Width in Recorder and Spectrum Analyzer
- Adaptive Linking of Recorders
- Adjustment of X-Tick Labels in Recorder
- Three size options for labels in Reporting pages
- Resizable Sidebars
- Recorder Mouse Label (activate in Recorder Settings)
- Prompt Header after Measurement Stop
** Additional Features
- h264 Encoder for Video
- Bayer Data Format for GIGE-Camera (reduce data transfer)
- Adjustable Playback Speed
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
- Plugins written with the OXYGEN SDK can now be used also offline
- e.g. ARINC and MIL-STD Plugins or your own
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TRION3-AOUT-8
- Added FileReplay support
** USB-Webcams
- Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
- Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
- Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
- Correctly visualize panel in overview
** Counter channels:
- Enabled PulswWidth mode
** OXYGEN-NET
- Fix for a potential crash when using custom file name patterns
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TEDS Support:
- Detection of IEEE 1451.4 compatible sensors (selection)
- Apply of scaling and mode of measurement input
- Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
- Native Support of CPAD2/3 Modules
** ARXML support for CAN:
- Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
- Enable the user to manually select the TRIONet for measurement
- Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
- Use Numeric Header data in Formula
- Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
- Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
- Kml-track data can be used as
center, left or right boundary of lane
** Additional Improvements:
- New Storing Option: Stop measurement after... additional to Pause
- Increase Pre-Time and Freeze time up to 60 seconds
- Manual (Recording)-Trigger via GUI or SCPI
- File Name pattern, user defined counter offset
- Formula Channels can now be also grouped
- Navigate thru channel list with CTRL+PAGE UP/DOWN
- Increased sensitivity of power flicker emission calculation
* Fixes:
- Update of Graphic Framework to avoid screen flickering on intel graphics
- CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
- Error Message regarding Oversampling @ Setup loading
- Problem with ACQ-Start with no channel Enabled on first DAQ Board
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed user scaling when loading setups using TRION-2402-V boards
- Changed TRIONet claim default setting to "Auto claim USB"
- Fixed modbus plugin dialog
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed a crash when UI elements from plugins are drawn
- Qt memory leak fix
- Fixed high memory consumption of the video instrument
- Fixed invalid formulas on async channels
- Fixed a crash when loading a complex modbus setup
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Power: improved accuracy of RMS value calculation
- Matrix Sampler: fixed high memory usage
- CPAD: fixed crash when accessing removed devices
- Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
- Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
- Needs TRION API 5.6.3 or better
- Added support for TRION3-1820-POWER
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN Updates
- New CAN detail setup for editing messages and signals
- OBD-II plugin
** New calculation plugin
- Frequency Measurement for periodical signals (0 ... 5000Hz)
** Export features
- HDF5 export plugin
- Excel export split data into multiple spreadsheets
- Fill gabs in TXT, CSV and Excel plugin
** New devices:
- EPAD3-TH8
** User Experience Improvements:
- Event list shows date
- Reset statistics on measurement start
Fixes:
* POWER
- accuracy improvements for low sample rate measurements
* TEDS Support:
- Support for older sensors
* Table scaling
- extrapolation for out of range values
* Advanced graphics
- Support for different Graphic APIs to fix issues when using
Windows Remote Desktop
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple dmd-files at once (step 1: only for OXYGEN-NET measurements)
- Batch export - Export multiple dmd-files at once
- Batch process dmd-files - Apply changes from one dmd-file to others
- Revert changes in dmd-files - go back to different save steps
** Array Math
- Process array-type channels (e.g. Power Harmonics) in Formula channels, support slicing
- Use array-type channels in statistic calculation
** Video
- Support of AVT Alvium series
- Rotate Video picture
** Power
- Option for relative harmonic (and interharmonic) channels (additional to absolute values), _hREL, _ihREL
- Option to synchronize the basic calculation interval to harmonic calculation interval
** Export
- New export format *.uff (Universal file format 58 & 58B)
* Improvements
** OXYGEN-NET
- Faster handling of property changes
- Faster claiming of nodes
- Faster loading of setup
** CPB Spectrum
- Analysis up to 500 kHz is possible
** CAN-OUT
- array-type channels can be used as source channel, just provide array index
** Setup & Settings
- Separate "Setup" Settings -> stored in *.dms-file
- Separate "System" Setting -> System wide Settings, independent from dms
* Fixes:
** Offline Calculation
- changes of FFT-window size lead to crash
** Data-Stream
- fixed memory leak when using low-samplerate channels
* Known Limitations
- Maximum 120 fps camera stream
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.0.1)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Fixes:
** Stability
- Fixed issue that let to qml engine memory corruption
** Setup Load
- Fixed crash on DMS load when channels do not match the current system
* Instruments
- Statistic data is not displayed in digital meter in Oxygen
** Export
- Fix TXT export statistics settings
- Fix export validation if only statistic or waveform property is available
- Fix for deactivated RPC III export
** SCPI
- Fix error return for EXPORT:AUTO ON|OFF command
** Camera
- Allow higher h264 bitrate for High-Res/High-FPS video
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.1.1.61822
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i5 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed wrong white on white rendering with Oxygen classic style
- Installation using SYSTEM account fixed
- Snapshot fixed an issue when the set interval was not applied correctly
- Order Analysis performance improvement
- Stability
- Frequency Measurement: Fixed Oxygen crash on >2MS boards
- Fix crash due to channel without timebase in audio player instrument
- Fix crash with Stop measurement trigger
- Fix crash when using spectrum analyzer and multiple file open
- Fix spurious crash when opening splitted DMD files
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.2.1.62584
## Files
DEWETRON_Oxygen_Setup_R6.2.1_x64.exe
DEWETRON_Oxygen_Setup_R6.2.1_x64_cvss.exe (no Python scripting)
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Data Navigation
- Import CSV files in analysis
- "Save As" allows to remove channel data from DMD files
- Advanced Statistics
- Triggered Statistics - calculate on trigger events
- Running Statistics - running statistics on given window for sync channels
- Hardware: XR Series
- Support for RS485 and CAN Mode
- Export DBC file in CAN Mode
- NetCDF Export
- Network Common Data Form support (NetCDF3, NetCDF4, NetCDF5)
- CVSS installer without embedded Python
## Improvements
- Power:
- Accumulate current signals for capacity computation
- User Experience
- Added error list
- "Selection" header type support
- Recorder allows up to 40 channels
- Multi select instruments to edit properties
- Hardware mismatch dialog can be forced
- XY Chart
- Multiple traces with shared X-Y axis
- DMD Reader
- Added functions to read measurement setup (xml)
- FFT
- Added FFT Averaging
- Enum Scaling
- Available for formular channels
- Exports
- Added align to trigger
## Fixes
- Fixed memory leak in split file video recording with h.264 on Intel hardware
- Memory consumption reduced for long-time recordings
- Power: flicker emission is computed more accurately
- TEDS: Fixed issue with accelerometer sensor
- Frequency measurement: Fixed crash with high sample rates (>2MS)
- ARXML: Fixed issue showing channels as other channels
- Excel Export:
- Fixed missing reduced samples
- Fixed user reduced channel names in
- CVS Import: Fixed handling of unicode paths
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.3.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fix MSI Installer packages missing OpenMP libraries
- Fix performance issue with OpenMP after installation
- Fix spelling errors in DE translation
- Fix FIR showing total delay and compensable delay
- Fix a crash caused by a missing timebase
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Improvements
- XCP - Arm Measurement option
- Vimba/GigE Camera Support for Linux
## Fixes
- Prevent crash on recording stop
- Fixed cancel in channel selection dialog
- Fixed calculation of time trigger
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed claiming of TRIONet in combination with Oxygen Net
- Fixed Oxygen Net nodes will not be recognized automatically when starting a preconfigured setup on the master
- Fixed crash when editing a DMD file
- Fixed storing to file paths using german umlauts
- Fixed trigger condition preview collapsing on sidebar close/open
- Fixed support for Alvium USB3 cameras with newest firmware
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.5.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Sensor DB: Fixed setting scaling
- Array instrument: Fixed x axis value not readable
- Oxygen: Fixed file icons for encoded paths
- TEDS: Apply prerequisites mode first before evaluation range-constraints
- Excel V2: Fixed align 0-time to trigger not used correctly
- Excel V2: Fixed channel missing on OVERALL sheet
- Oxygen NET: Fixed set scaling factor/offset in multi channel selection
- CSV import: Remove NaN for timeshifted sync data
- Oxygen: Fixed wrong statistics window shown in individual channel config
- Power: Fixed recording start handling in power module preventing offline calculation start
- MILSTD: Fixed decoding crash
- XR: Fixed issue when adding XR/CPAD modules
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Power Group features
- Adaptions on Flicker
- Editable grid impedance angles
- D-Parameter evaluation
- Adaptions on Rolling Calculations
- Extended nominal frequency threshold 0..95%
- Power Harmonics
- New interpolation to cubic spline
- Better accuracy when low sample rates are used.
- AVT Alvium G1 and G5 series support
- Camera trigger support
- LAN data transfer
- Order Analysis
- Multiple speed directions
- Overall RMS channels
## Improvements
- Analog Meter instrument
- Optionally show digital value
- Spectrum Analyzer instrument
- Peak Hair cursor
- SCPI
- Query FIR Filter Transfer Function
- Array Chart instrument
- Interpolated Line display type
## Fixes
- Improvements when using DataStream on OXYGEN-NET master systems
- pyDmdReader
- Performance improvement for reading large datasets
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.0.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* Fixes:
** GUI: Rendering of the channel mapping dialog took a long time.
** GUI: Cancelling the channel mapping dialog took a long time.
** GUI: Creation and adding a lot of channels to digital instruments was slow.
** Oxygen Net: High memory consumption on master and remote node.
** Oxygen Net: High cpu load with enabled gps channels.
** DAQP: DAQP modules could not be configured after loading a setup.
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** Vector FlexRay support
- Supports Fibex 2.0 to 4.1.2
- Decoding to individual signals with offline support
- Intuitive channel picker
** CAN-Offline decoding
- Intuitive channel picker
** File Browser
- Oxygen file browser is able to create new folders
- Oxygen file browser is able to use standard file explorer ("Browse..." button)
** Filesplit by absolute time
- Allows filesplits on rounded absolute time
** Array access in formula
- Access single array elements
** OXYGEN Viewer
- Review data files in parallel to a running Oxygen.
** Update of 6-Phase Calculation (Power)
- Changed 6P6W schematic to 2x3P3W.
** Oxygen SDK
- Improvements due to first reviews. More on GitHub (https://github.com/DEWETRON/OXYGEN-SDK)
** Oxygen GUI Improvements
- Channel list: Unused channel groups are automatically folded
- Channel list: Math formula editor now supports multiline edit
- Channel list: Simple channel type filter
- Improved tooltips
- Cursors can now be renamed (A/B cursor)
- Text instrument: Can display measurement time
* Fixes:
** Actions: Zero and Bridge Balance action on large systems
** Power:Crash with power group in special combinations with XCP
** Power: Crash when deleting power group on a special customer setup
** Trigger: Triggered recording: recording does not restart after resync
** Oxygen Net: High memory consumption when using Pause mode
** FFT: Fixed an invalid sign jump in the phase calculation
** EPAD/DAQP: Crash that may happens on module scans with invalid module addresses
** MSI: Fixed a scaling issue with MSI2-STG-5V, added missing Bridge Factor input field
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** Channel-wise sample rate selector
- Set individual sampling rates on the same board
- Auto-Adjust of AAF
** Advanced storing modes
- individual storing settings per channel
- including skip mode for sample rate switch emulation
- show "Statistics" data in all instruments
** Efficiency Map (Matrix Sampler)
- Calculation Module for matrix sampling (X-Y -> Z)
- used for efficiency map creation (matrix channel)
- including interpolation in intensity diagram
- requires OXY-OPT-POW-ADV
** Soundlevel Meter
- Calculation module for sound level determination
- A/B/C/D/Z frequency weighting
- slow, fast, impulse time weighting
- interval and continous mode
* Fixes:
** Export:
- Fixed Acquisition Problems after AUTO-Export
- Lower the MATLAB Compressed Export duration by 80%
- MDF4: Export did not contain any data, if a CAN Message was selected
** CAN:
- Fixed Problems with CAN-OUT at high data rate
- DBC-Parser now can move on with DLC mismatch
- J1939: Ignore priority and source address (if defined as 0xFE) in message id
** OXYGEN NET:
- Fixed Memory increase in case of deactivating the statistics storage
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** ARINC-429 (Altadt)
- Support for TRION-ARINC (PMC-429)
- A429 Decoder (online)
** Constant Percentage Bandwidth (CBP) spectrum
- Octave, third octave or twelfth octave band resolution according to EN61260
- Amplitude or decibel spectrum
- Array chart instrument
** Audio replay
- Audio replay instrument
** FFT reference curves
- available in spectrum analyzer
** New export formats
- WAV export
- RPCIII export
** Improved digital instrument
- improved layout
- configureable minimum digits and automatic unit prefix
** SCPI
- Improved setup load (async)
** PUREC device support
- Chassis visualization added
- MSI displayed in channel overview
* Channel list
- Width is now individually adjustable
* Settings:
- New Amplifier / RS232 / RS485 page
- Configure serial ports without a restart
* OXYGEN SDK
- Export plugin extensions
* Fixes:
** Improved MATLAB export
- Faster Compressed export
- No interval split
** Improved EXPORT interface
- Faster interface for 1000+ channels
** Improved CAN-OUT
- Driver issues limit CAN-OUT to less than 700 messages per second
- If this limit is exceeded, older messages get automatically dropped
* Installation procedure:
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
** Power instrument
- Fixed NaN displays in power instrument when opening a DMD
** XCP
- Fixed a memory leak
** Oxygen SDK
- QML Sandbox fixed reload
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Offline POWER Analysis
- Create Power Group in Replay (File) Mode
** MODBUS TCP Plugin
- Fetch data from Modbus Devices via TCP
** MIL-STD-1553 (Altadt)
- Support for TRION-MIL (PMC-1553)
- MIL-STD-1553 Decoder (online)
** TRION3-AOUT-8
- Support of new TRION3 Board
- Support of new Functions: Constant Output and Function Generator
** New Features in Spectrum Analyzer
- Show optional harmonic cursors in FFT
- Switch between Hz and CPM x-Axis
** CAN Channel Picker
- Option to show only active messages
** CAN DBC Parser
- More advanced fault tolerance and error reporting
** New features in Python Framework for future use
- User Input Dialog
** MSI2-600-V
- Software support of new MSI2
* Fixes:
** Random crashes when using the Audio Instrument
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Load External Video (HS-Video-Post-Sync)
- Load external recorded Video (e.g. HS-Video) in Analysis Mode
- Manual Synchronization to Measurement Data
** Save Measurement Screen to Video File
- Create a screen capturing of the measurement screen
- Select Framerate, Quality and Speed
** Setup Configuration Lock
- Lock Configuration on Setup load to avoid manipulation
- Select between different areas of lock
- Unlock with Password
** Power Analysis
- d/q Analysis for use with Synchronous Machines / BLDC
- Harmonic Table view
** New Data Export Formats
- NI Diadem DAT Export .dat
- DynaWorks Neutral File .nt
** Additional SCPI Commands
- Check Sync State
- Create and modify header data
** Reworked Filename Composer
- Build your Measurement File name out of pre-defined blocks (date, time, id)
** User Experience Improvements
- Adjustable Line Width in Recorder and Spectrum Analyzer
- Adaptive Linking of Recorders
- Adjustment of X-Tick Labels in Recorder
- Three size options for labels in Reporting pages
- Resizable Sidebars
- Recorder Mouse Label (activate in Recorder Settings)
- Prompt Header after Measurement Stop
** Additional Features
- h264 Encoder for Video
- Bayer Data Format for GIGE-Camera (reduce data transfer)
- Adjustable Playback Speed
* New Features Oxygen SDK:
** Use OXYGEN Plugins in Analysis Mode
- Plugins written with the OXYGEN SDK can now be used also offline
- e.g. ARINC and MIL-STD Plugins or your own
* Fixes:
** Bad Recorder reading with slow data channels (e.g. EPAD) during recording
** CSV Export Problem with Statistic Data
** RPC III Export only exported first 10 channels with right name
** SCPI-ELOG: Absolute Timestamp freeze after 2000s
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TRION3-AOUT-8
- Added FileReplay support
** USB-Webcams
- Increased compatibility to support additional devices
* Fixes:
** TRION-2402-V
- Increased phase accuracy (auto-oversampling mode)
** Ethernet Receiver
- Support UDP Packages with more that 1400 Bytes (up to 65536)
** TRION-X-DLV-CB16-D9
- Correctly visualize panel in overview
** Counter channels:
- Enabled PulswWidth mode
** OXYGEN-NET
- Fix for a potential crash when using custom file name patterns
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** TEDS Support:
- Detection of IEEE 1451.4 compatible sensors (selection)
- Apply of scaling and mode of measurement input
- Tested and working on TRION(3)-18xx-MULTI, TRION-2402-MULTI and TRION-2402-dACC
** CPAD Decoder Plugin:
- Native Support of CPAD2/3 Modules
** ARXML support for CAN:
- Support of ARMXL 4.2 for decoding of CAN Messages
** TRIONet manual claiming:
- Enable the user to manually select the TRIONet for measurement
- Use multiple measurements in one Ethernet System
** Header Data as Formula Constant:
- Use Numeric Header data in Formula
- Can be adjusted also via SCPI in Testbed Environment
** Enable Voltage and Current Excitation Monitor:
- Check actual set Voltage and Current Excitation of selected Boards
** BirdsEye adaptions:
- Kml-track data can be used as
center, left or right boundary of lane
** Additional Improvements:
- New Storing Option: Stop measurement after... additional to Pause
- Increase Pre-Time and Freeze time up to 60 seconds
- Manual (Recording)-Trigger via GUI or SCPI
- File Name pattern, user defined counter offset
- Formula Channels can now be also grouped
- Navigate thru channel list with CTRL+PAGE UP/DOWN
- Increased sensitivity of power flicker emission calculation
* Fixes:
- Update of Graphic Framework to avoid screen flickering on intel graphics
- CAN-OUT, wrong data @ high speed, new Option "Autonomous Resend" (disabled by default to avoid the issue)
- Error Message regarding Oversampling @ Setup loading
- Problem with ACQ-Start with no channel Enabled on first DAQ Board
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed user scaling when loading setups using TRION-2402-V boards
- Changed TRIONet claim default setting to "Auto claim USB"
- Fixed modbus plugin dialog
* Known Limitations:
- CPAD Baudrate Setting function is limited
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Fixed a crash when UI elements from plugins are drawn
- Qt memory leak fix
- Fixed high memory consumption of the video instrument
- Fixed invalid formulas on async channels
- Fixed a crash when loading a complex modbus setup
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* Fixes:
- Power: improved accuracy of RMS value calculation
- Matrix Sampler: fixed high memory usage
- CPAD: fixed crash when accessing removed devices
- Fixed a bug when the channel matching dialog is shown with TRION-POWER boards
- Fixed a bug when OXYGEN process is still in memory after quitting the application in Windows 7.
- Needs TRION API 5.6.3 or better
- Added support for TRION3-1820-POWER
* Known Limitations:
- CPAD Baudrate Setting function is limited
- when experiencing high or increasing memory consumption: Please try to use OXYGEN in Safe Mode.
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.0.1)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Fixes:
** Stability
- Fixed issue that let to qml engine memory corruption
** Setup Load
- Fixed crash on DMS load when channels do not match the current system
* Instruments
- Statistic data is not displayed in digital meter in Oxygen
** Export
- Fix TXT export statistics settings
- Fix export validation if only statistic or waveform property is available
- Fix for deactivated RPC III export
** SCPI
- Fix error return for EXPORT:AUTO ON|OFF command
** Camera
- Allow higher h264 bitrate for High-Res/High-FPS video
* Requirements:
** 6.x Software License required!
** OS: Windows 10 64bit, or better
** CPU: Intel i5 3rd gen. or better
** Minimum RAM: 8 GB
** Recommended RAM: 16 GB (for high sample rates and channel counts)
** DAQ Hardware:
* DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.0)
* DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
* DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
* Installation procedure:
** TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
* New Features Oxygen:
** Data Navigation
- Open multiple DMD files from different measurements
** Scaling
- Polynomial Scaling added
** Exports
- New Famos export (imc2)
- New TDMS export
** Demo Licenses
- License with expiration date
** Automatically open DMD after measurement
* Improvements
** CAN
- Scan for messages added
- ENUM Scaling support
** IRIG-OUT
- Implemented for TIMING-V3
** POWER
- Additional calculations (Ah,Z)
** SCPI
- NUM:VAL also in BINARY Format
** Statistics
- Additional Calculations
- Overlap Calculation
- Overall Calculation
** Trigger
- Post time feature
* Fixes
- Installation using SYSTEM account now possible
- CSV Export fixed
- Digital Out channels have correct value after loading DMS
- GPS instrument: OpenStreetMap maps download works
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.1.1.61822
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i5 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed wrong white on white rendering with Oxygen classic style
- Installation using SYSTEM account fixed
- Snapshot fixed an issue when the set interval was not applied correctly
- Order Analysis performance improvement
- Stability
- Frequency Measurement: Fixed Oxygen crash on >2MS boards
- Fix crash due to channel without timebase in audio player instrument
- Fix crash with Stop measurement trigger
- Fix crash when using spectrum analyzer and multiple file open
- Fix spurious crash when opening splitted DMD files
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 6.2.1.62584
## Files
DEWETRON_Oxygen_Setup_R6.2.1_x64.exe
DEWETRON_Oxygen_Setup_R6.2.1_x64_cvss.exe (no Python scripting)
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.2.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Data Navigation
- Import CSV files in analysis
- "Save As" allows to remove channel data from DMD files
- Advanced Statistics
- Triggered Statistics - calculate on trigger events
- Running Statistics - running statistics on given window for sync channels
- Hardware: XR Series
- Support for RS485 and CAN Mode
- Export DBC file in CAN Mode
- NetCDF Export
- Network Common Data Form support (NetCDF3, NetCDF4, NetCDF5)
- CVSS installer without embedded Python
## Improvements
- Power:
- Accumulate current signals for capacity computation
- User Experience
- Added error list
- "Selection" header type support
- Recorder allows up to 40 channels
- Multi select instruments to edit properties
- Hardware mismatch dialog can be forced
- XY Chart
- Multiple traces with shared X-Y axis
- DMD Reader
- Added functions to read measurement setup (xml)
- FFT
- Added FFT Averaging
- Enum Scaling
- Available for formular channels
- Exports
- Added align to trigger
## Fixes
- Fixed memory leak in split file video recording with h.264 on Intel hardware
- Memory consumption reduced for long-time recordings
- Power: flicker emission is computed more accurately
- TEDS: Fixed issue with accelerometer sensor
- Frequency measurement: Fixed crash with high sample rates (>2MS)
- ARXML: Fixed issue showing channels as other channels
- Excel Export:
- Fixed missing reduced samples
- Fixed user reduced channel names in
- CVS Import: Fixed handling of unicode paths
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.3.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fix MSI Installer packages missing OpenMP libraries
- Fix performance issue with OpenMP after installation
- Fix spelling errors in DE translation
- Fix FIR showing total delay and compensable delay
- Fix a crash caused by a missing timebase
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Improvements
- XCP - Arm Measurement option
- Vimba/GigE Camera Support for Linux
## Fixes
- Prevent crash on recording stop
- Fixed cancel in channel selection dialog
- Fixed calculation of time trigger
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.4.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Fixed claiming of TRIONet in combination with Oxygen Net
- Fixed Oxygen Net nodes will not be recognized automatically when starting a preconfigured setup on the master
- Fixed crash when editing a DMD file
- Fixed storing to file paths using german umlauts
- Fixed trigger condition preview collapsing on sidebar close/open
- Fixed support for Alvium USB3 cameras with newest firmware
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.5.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
- Sensor DB: Fixed setting scaling
- Array instrument: Fixed x axis value not readable
- Oxygen: Fixed file icons for encoded paths
- TEDS: Apply prerequisites mode first before evaluation range-constraints
- Excel V2: Fixed align 0-time to trigger not used correctly
- Excel V2: Fixed channel missing on OVERALL sheet
- Oxygen NET: Fixed set scaling factor/offset in multi channel selection
- CSV import: Remove NaN for timeshifted sync data
- Oxygen: Fixed wrong statistics window shown in individual channel config
- Power: Fixed recording start handling in power module preventing offline calculation start
- MILSTD: Fixed decoding crash
- XR: Fixed issue when adding XR/CPAD modules
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.6.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
- Power Group features
- Adaptions on Flicker
- Editable grid impedance angles
- D-Parameter evaluation
- Adaptions on Rolling Calculations
- Extended nominal frequency threshold 0..95%
- Power Harmonics
- New interpolation to cubic spline
- Better accuracy when low sample rates are used.
- AVT Alvium G1 and G5 series support
- Camera trigger support
- LAN data transfer
- Order Analysis
- Multiple speed directions
- Overall RMS channels
## Improvements
- Analog Meter instrument
- Optionally show digital value
- Spectrum Analyzer instrument
- Peak Hair cursor
- SCPI
- Query FIR Filter Transfer Function
- Array Chart instrument
- Interpolated Line display type
## Fixes
- Improvements when using DataStream on OXYGEN-NET master systems
- pyDmdReader
- Performance improvement for reading large datasets
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.0.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.1.1)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN-FD
- Set Samplepoint and advanced timing parameter
* Fixes:
** Common:
- OXYGEN crashes when switching AI to CAN
** Export:
- XLSX-Export have wrong output format (text instead of value)
** MSI:
- MSI2-STG, no balance action possible on CB16
- MSI2-STG, bridge factor missing in settings
** Intensity Diagram:
- Scaling broken after changes of channel settings
** Spectrum Analyzer:
- Phase channel is not rendered correctly
** Snapshot Channels:
- Sporadic NaN values when using aggregation (e.g. AVG)
** TRION-POWER:
- SUB-Modules have ranges with wrong scaling
** SCPI:
- Command STORE:FILE:NAME not applicable
- Command :NUM:DIMS? does not report the right sample dimension
** XCP:
- Use of same Oxygen setup leads to different A2L-file
- A2L-file contains non usable channels (e.g. Power Group Channel)
- Connect/Disconnect sometimes lead to deadlock of Oxygen
- adapt visible names in A2L for better compatiblity with CANoe
- Improved stability
* Changes:
** Power:
- channel's samplerate for mechanical power must be less or equal to U/I channels
** FFT:
- FFT-Group channel (complex) is not stored by default
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.0.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** CAN-FD
- Set Samplepoint and advanced timing parameter
* Fixes:
** Common:
- OXYGEN crashes when switching AI to CAN
** Export:
- XLSX-Export have wrong output format (text instead of value)
** MSI:
- MSI2-STG, no balance action possible on CB16
- MSI2-STG, bridge factor missing in settings
** Intensity Diagram:
- Scaling broken after changes of channel settings
** Spectrum Analyzer:
- Phase channel is not rendered correctly
** Snapshot Channels:
- Sporadic NaN values when using aggregation (e.g. AVG)
** TRION-POWER:
- SUB-Modules have ranges with wrong scaling
** SCPI:
- Command STORE:FILE:NAME not applicable
- Command :NUM:DIMS? does not report the right sample dimension
** XCP:
- Use of same Oxygen setup leads to different A2L-file
- A2L-file contains non usable channels (e.g. Power Group Channel)
- Connect/Disconnect sometimes lead to deadlock of Oxygen
- adapt visible names in A2L for better compatiblity with CANoe
- Improved stability
* Changes:
** Power:
- channel's samplerate for mechanical power must be less or equal to U/I channels
** FFT:
- FFT-Group channel (complex) is not stored by default
## Requirements
* 7.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R7.0.0)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 7.0.0.2733
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 7.0.0.2733
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
Components | Version
--------------------------------|--------------------------
DEWETRON Oxygen | 7.0.0.2733
## New Features
* UI Updates
* New Icon for Oxygen Viewer
* New dark mode
* Channel reorder in instruments
* Modal Test
* Saturation Meter
* New default instrument showing all AI channels
* TEDS Editor
* Power Analysis Screen Template
* SCPI
* Edit trigger settings
* EtherCAT improvements
* Better 500S/s and 1000S/s output rate
## Fixes
* Fixed: Record stop takes a long time with CAN channels
* Fixed: Calculation not finished with an offline formula
* Fixed: Digital instruments slow at 10MS
* Fixed: Disabling Power Group does not disable all channels
* Fixed: Offline calculation pending on deactivated channels
* Fixed: Offline Formula with triggered statistic
## Requirements
* 7.x Software License required!
* OS:
* Ubuntu 22.04
* Red Hat Enterprise Linux 8.x
* Red Hat Enterprise Linux 9.x
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
## Requirements
* 7.x Software License required!
* OS:
* Ubuntu 22.04
* Red Hat Enterprise Linux 8.x
* Red Hat Enterprise Linux 9.x
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
## Requirements
* 7.x Software License required!
* OS:
* Ubuntu 22.04
* Red Hat Enterprise Linux 8.x
* Red Hat Enterprise Linux 9.x
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
* Improved NEX[DAQ] suport in Pak live plugin
* Max channel number for Saturation Meter set to 128
## Known Limitations
* Setup load on Oxygen Net takes a long time
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** Vector FlexRay support
- Supports Fibex 2.0 to 4.1.2
- Decoding to individual signals with offline support
- Intuitive channel picker
** CAN-Offline decoding
- Intuitive channel picker
** File Browser
- Oxygen file browser is able to create new folders
- Oxygen file browser is able to use standard file explorer ("Browse..." button)
** Filesplit by absolute time
- Allows filesplits on rounded absolute time
** Array access in formula
- Access single array elements
** OXYGEN Viewer
- Review data files in parallel to a running Oxygen.
** Update of 6-Phase Calculation (Power)
- Changed 6P6W schematic to 2x3P3W.
** Oxygen SDK
- Improvements due to first reviews. More on GitHub (https://github.com/DEWETRON/OXYGEN-SDK)
** Oxygen GUI Improvements
- Channel list: Unused channel groups are automatically folded
- Channel list: Math formula editor now supports multiline edit
- Channel list: Simple channel type filter
- Improved tooltips
- Cursors can now be renamed (A/B cursor)
- Text instrument: Can display measurement time
* Fixes:
** Actions: Zero and Bridge Balance action on large systems
** Power:Crash with power group in special combinations with XCP
** Power: Crash when deleting power group on a special customer setup
** Trigger: Triggered recording: recording does not restart after resync
** Oxygen Net: High memory consumption when using Pause mode
** FFT: Fixed an invalid sign jump in the phase calculation
** EPAD/DAQP: Crash that may happens on module scans with invalid module addresses
** MSI: Fixed a scaling issue with MSI2-STG-5V, added missing Bridge Factor input field
## Files
Ubuntu 22.04: dewetron-apps-6.7.1.94-jammy.install.gz
Ubuntu 20.04: dewetron-apps-6.7.1.105-focal.install.gz
Red Hat Enterprise Linux 9: dewetron-apps-6.7.1.119-el9.install.gz
Red Hat Enterprise Linux 8: dewetron-apps-6.7.1.136-el8.install.gz
## Requirements
* 6.x Software License required!
* OS: Ubuntu 22.04 “Focal Fossa” (or compatible)
* OS: Ubuntu 20.04 “Focal Fossa” (or compatible)
* OS: Red Hat Enterprise Linux 9 (or compatible)
* OS: Red Hat Enterprise Linux 8 (or compatible)
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
## Installation procedure
- Unpack the installer
- $ gzip -d dewetron-apps-6.7.1.*.install.gz
- Run the installer
- $ sudo chmod +x ./dewetron-apps-6.7.1.*.install
- $ sudo ./dewetron-apps-6.7.1.*.install
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed split view appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Changed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Files
Ubuntu 22.04: dewetron-apps-6.7.1.94-jammy.install.gz
Ubuntu 20.04: dewetron-apps-6.7.1.105-focal.install.gz
Red Hat Enterprise Linux 9: dewetron-apps-6.7.1.119-el9.install.gz
Red Hat Enterprise Linux 8: dewetron-apps-6.7.1.136-el8.install.gz
## Requirements
* 6.x Software License required!
* OS: Ubuntu 22.04 “Focal Fossa” (or compatible)
* OS: Ubuntu 20.04 “Focal Fossa” (or compatible)
* OS: Red Hat Enterprise Linux 9 (or compatible)
* OS: Red Hat Enterprise Linux 8 (or compatible)
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
## Installation procedure
- Unpack the installer
- $ gzip -d dewetron-apps-6.7.1.*.install.gz
- Run the installer
- $ sudo chmod +x ./dewetron-apps-6.7.1.*.install
- $ sudo ./dewetron-apps-6.7.1.*.install
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed split view appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Changed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.2)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
- Plugin: Added UDP Sender plugin
- Plugin: Removed K&S plugin (UDP Receiver)
- Updated Qt 5.15.11: Fixed screen flicker with Intel Iris XE graphics
- Fixed performance issue with digital meter on 10MS systems
- TRIONet: Fixed an error message when nexdaq/trionet/oxynet is claimed with different name than in dms
- Sync: Auto sync setups correctly setups PTP when using DEWE3 systems an NEX[DAQ] devices
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.2)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
- Plugin: Added UDP Sender plugin
- Plugin: Removed K&S plugin (UDP Receiver)
- Updated Qt 5.15.11: Fixed screen flicker with Intel Iris XE graphics
- Fixed performance issue with digital meter on 10MS systems
- TRIONet: Fixed an error message when nexdaq/trionet/oxynet is claimed with different name than in dms
- Sync: Auto sync setups correctly setups PTP when using DEWE3 systems an NEX[DAQ] devices
## Requirements
* 6.x Software License required!
* OS: Ubuntu 20.04 (focal fossa)
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.2.1)
## Installation procedure
- Unpack the installer
- $ gzip -d dewetron-apps-6.2.1.62660-focal.install.gz
- Run the installer
- $ sudo ./dewetron-apps-6.2.1.62660-focal.install
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features
- Data Navigation
- Import CSV files in analysis
- "Save As" allows to remove channel data from DMD files
- Advanced Statistics
- Triggered Statistics - calculate on trigger events
- Running Statistics - running statistics on given window for sync channels
- Hardware: XR Series
- Support for RS485 and CAN Mode
- Export DBC file in CAN Mode
- NetCDF Export
- Network Common Data Form support (NetCDF3, NetCDF4, NetCDF5)
- CVSS installer without embedded Python
## Improvements
- Power:
- Accumulate current signals for capacity computation
- User Experience
- Added error list
- "Selection" header type support
- Recorder allows up to 40 channels
- Multi select instruments to edit properties
- Hardware mismatch dialog can be forced
- XY Chart
- Multiple traces with shared X-Y axis
- DMD Reader
- Added functions to read measurement setup (xml)
- FFT
- Added FFT Averaging
- Enum Scaling
- Available for formular channels
- Exports
- Added align to trigger
## Fixes
- Fixed memory leak in split file video recording with h.264 on Intel hardware
- Memory consumption reduced for long-time recordings
- Power: flicker emission is computed more accurately
- TEDS: Fixed issue with accelerometer sensor
- Frequency measurement: Fixed crash with high sample rates (>2MS)
- ARXML: Fixed issue showing channels as other channels
- Excel Export:
- Fixed missing reduced samples
- Fixed user reduced channel names in
- CVS Import: Fixed handling of unicode paths
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.2)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
- Plugin: Added UDP Sender plugin
- Plugin: Removed K&S plugin (UDP Receiver)
- Updated Qt 5.15.11: Fixed screen flicker with Intel Iris XE graphics
- Fixed performance issue with digital meter on 10MS systems
- TRIONet: Fixed an error message when nexdaq/trionet/oxynet is claimed with different name than in dms
- Sync: Auto sync setups correctly setups PTP when using DEWE3 systems an NEX[DAQ] devices
## Requirements
* 6.x Software License required!
* OS: Windows 10 64bit or better
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.2)
- DEWETRON ORION DAQ (ORION DAQ Driver V2.3.1.0)
- DEWETRON ORION DSA (ORION DSA Driver V5.0.1.0)
## Installation procedure
- TRION:
- Install TRION applications
- Reboot system (if requested by the installer)
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
- OXYGEN:
- Install Oxygen
- Verify HW settings in system menu on first startup
## New Features and most important bugfixes
- Plugin: Added UDP Sender plugin
- Plugin: Removed K&S plugin (UDP Receiver)
- Updated Qt 5.15.11: Fixed screen flicker with Intel Iris XE graphics
- Fixed performance issue with digital meter on 10MS systems
- TRIONet: Fixed an error message when nexdaq/trionet/oxynet is claimed with different name than in dms
- Sync: Auto sync setups correctly setups PTP when using DEWE3 systems an NEX[DAQ] devices
## Files
Ubuntu 22.04: dewetron-apps-6.7.1.94-jammy.install.gz
Ubuntu 20.04: dewetron-apps-6.7.1.105-focal.install.gz
Red Hat Enterprise Linux 9: dewetron-apps-6.7.1.119-el9.install.gz
Red Hat Enterprise Linux 8: dewetron-apps-6.7.1.136-el8.install.gz
## Requirements
* 6.x Software License required!
* OS: Ubuntu 22.04 “Focal Fossa” (or compatible)
* OS: Ubuntu 20.04 “Focal Fossa” (or compatible)
* OS: Red Hat Enterprise Linux 9 (or compatible)
* OS: Red Hat Enterprise Linux 8 (or compatible)
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
## Installation procedure
- Unpack the installer
- $ gzip -d dewetron-apps-6.7.1.*.install.gz
- Run the installer
- $ sudo chmod +x ./dewetron-apps-6.7.1.*.install
- $ sudo ./dewetron-apps-6.7.1.*.install
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed split view appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Changed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Files
Ubuntu 22.04: dewetron-apps-6.7.1.94-jammy.install.gz
Ubuntu 20.04: dewetron-apps-6.7.1.105-focal.install.gz
Red Hat Enterprise Linux 9: dewetron-apps-6.7.1.119-el9.install.gz
Red Hat Enterprise Linux 8: dewetron-apps-6.7.1.136-el8.install.gz
## Requirements
* 6.x Software License required!
* OS: Ubuntu 22.04 “Focal Fossa” (or compatible)
* OS: Ubuntu 20.04 “Focal Fossa” (or compatible)
* OS: Red Hat Enterprise Linux 9 (or compatible)
* OS: Red Hat Enterprise Linux 8 (or compatible)
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.7.1)
## Installation procedure
- Unpack the installer
- $ gzip -d dewetron-apps-6.7.1.*.install.gz
- Run the installer
- $ sudo chmod +x ./dewetron-apps-6.7.1.*.install
- $ sudo ./dewetron-apps-6.7.1.*.install
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* SCPI: Fixed a potential crash when saving screenshots
* Intensity diagram: Fixed split view appearance
* Correlation: Fixed a crash when a signal channel is not available
* Sync Page: Changed connector name from ETH to PTP
* File names: Fixed a crash when invalid header data is used in a file name template
* TRIONet: Fixed an issue when IPV6 updates triggered spurious acquisition restarts
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* Fixes:
** GUI: Rendering of the channel mapping dialog took a long time.
** GUI: Cancelling the channel mapping dialog took a long time.
** GUI: Creation and adding a lot of channels to digital instruments was slow.
** Oxygen Net: High memory consumption on master and remote node.
** Oxygen Net: High cpu load with enabled gps channels.
** DAQP: DAQP modules could not be configured after loading a setup.
## Requirements
* 6.x Software License required!
* OS: Red Hat Enterprise Linux 8 (or compatible)
* CPU: Intel i3 3rd gen. or better
* Minimum RAM: 8 GB
* Recommended RAM: 16 GB (for high sample rates and channel counts)
* DAQ Hardware:
- DEWETRON TRION and TRION3 (DEWETRON TRION Software R6.2.1)
## Installation procedure
- Unpack the installer
- $ gzip -d dewetron-apps-6.2.1.62660-el8.install.gz
- Run the installer
- $ sudo ./dewetron-apps-6.2.1.62660-el8.install
- Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
- Power-cycle TRION boards (Power down system, then restart)
- Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features
- Data Navigation
- Import CSV files in analysis
- "Save As" allows to remove channel data from DMD files
- Advanced Statistics
- Triggered Statistics - calculate on trigger events
- Running Statistics - running statistics on given window for sync channels
- Hardware: XR Series
- Support for RS485 and CAN Mode
- Export DBC file in CAN Mode
- NetCDF Export
- Network Common Data Form support (NetCDF3, NetCDF4, NetCDF5)
- CVSS installer without embedded Python
## Improvements
- Power:
- Accumulate current signals for capacity computation
- User Experience
- Added error list
- "Selection" header type support
- Recorder allows up to 40 channels
- Multi select instruments to edit properties
- Hardware mismatch dialog can be forced
- XY Chart
- Multiple traces with shared X-Y axis
- DMD Reader
- Added functions to read measurement setup (xml)
- FFT
- Added FFT Averaging
- Enum Scaling
- Available for formular channels
- Exports
- Added align to trigger
## Fixes
- Fixed memory leak in split file video recording with h.264 on Intel hardware
- Memory consumption reduced for long-time recordings
- Power: flicker emission is computed more accurately
- TEDS: Fixed issue with accelerometer sensor
- Frequency measurement: Fixed crash with high sample rates (>2MS)
- ARXML: Fixed issue showing channels as other channels
- Excel Export:
- Fixed missing reduced samples
- Fixed user reduced channel names in
- CVS Import: Fixed handling of unicode paths
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* Installation procedure:
** TRION:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
** OXYGEN:
** Install Oxygen
** Verify HW settings in system menu on first startup
* Installation procedure:
***TRION:
** Uninstall previous Oxygen version
** Uninstall any previous TRION version via system uninstall (control panel).
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** HW support:
-MSI-RTD adapter
-MSI2 adapters
-TRION[3]-18xx-POWER-4 Delay Compensation (phase-align current input)
** Sensor Database
-choose sensor scaling/amplifier settings from editable database
** Table Scaling
** IIR Filter:
-Bandpass and Bandstop filter
** Usability:
-dark measurement screen
-enter filename at recording start
-export to DMD
-export between cursors
* Support of MSI2-Adapters:
** MSI2-TH-x
** MSI2-250R-20mA
** MSI2-LVDT
** MSI2-STG-5V
** MSI2-STG-10V
** MSI2-CH-5
** MSI2-CH-100
* Fixes:
** GUI: now ready for HDPI-Screens, automatic setting of scaling for better compatiblity on 4k+ Displays
** CAN-OUT: much faster response in channel list when switching to transmit, fixed possible crash when using many transmit-messages
** dmd reader: correct behaviour when reading multifile-parts
** Oxygen Net: correct behaviour when using IRIG with no DIOs enabled
** Matlab-Export: Fixed problems with export of long-term measurements
** FFT: better performance of big FFT-calculations which lead to "High math load" warning
** Highspeed: Fixed problems using fast TRION3-Modules which caused "Unable to read data" Error
* Known Limitations, general (additional to Oxygen 3.6):
** DMD-Export: May not work correctly with multifile-parts and offline calculated channels
** DMD-Export: Changes in setup will only be exported when saved before to origin file
** DMD-Export: Offline created channels will only be exported when saved before to origin file
** DMD-Export: Orange cursor in reporting pages will not be moved to exported area
* Installation procedure:
***TRION:
** Uninstall previous Oxygen version
** Uninstall any previous TRION version via system uninstall (control panel).
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** HW support:
-MSI-RTD adapter
-MSI2 adapters
-TRION[3]-18xx-POWER-4 Delay Compensation (phase-align current input)
** Sensor Database
-choose sensor scaling/amplifier settings from editable database
** Table Scaling
** IIR Filter:
-Bandpass and Bandstop filter
** Usability:
-dark measurement screen
-enter filename at recording start
-export to DMD
-export between cursors
* Support of MSI2-Adapters:
** MSI2-TH-x
** MSI2-250R-20mA
** MSI2-LVDT
** MSI2-STG-5V
** MSI2-STG-10V
** MSI2-CH-5
** MSI2-CH-100
* Fixes:
** GUI: now ready for HDPI-Screens, automatic setting of scaling for better compatiblity on 4k+ Displays
** CAN-OUT: much faster response in channel list when switching to transmit, fixed possible crash when using many transmit-messages
** dmd reader: correct behaviour when reading multifile-parts
** Oxygen Net: correct behaviour when using IRIG with no DIOs enabled
** Matlab-Export: Fixed problems with export of long-term measurements
** FFT: better performance of big FFT-calculations which lead to "High math load" warning
** Highspeed: Fixed problems using fast TRION3-Modules which caused "Unable to read data" Error
* Known Limitations, general (additional to Oxygen 3.6):
** DMD-Export: May not work correctly with multifile-parts and offline calculated channels
** DMD-Export: Changes in setup will only be exported when saved before to origin file
** DMD-Export: Offline created channels will only be exported when saved before to origin file
** DMD-Export: Orange cursor in reporting pages will not be moved to exported area
* Installation procedure:
***TRION:
** Uninstall previous Oxygen version
** Uninstall any previous TRION version via system uninstall (control panel).
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Install Oxygen
** Verify HW settings in system menu on first startup
* New Features Oxygen:
** HW support:
-MSI-RTD adapter
-MSI2 adapters
-TRION[3]-18xx-POWER-4 Delay Compensation (phase-align current input)
** Sensor Database
-choose sensor scaling/amplifier settings from editable database
** Table Scaling
** IIR Filter:
-Bandpass and Bandstop filter
** Usability:
-dark measurement screen
-enter filename at recording start
-export to DMD
-export between cursors
* Support of MSI2-Adapters:
** MSI2-TH-x
** MSI2-250R-20mA
** MSI2-LVDT
** MSI2-STG-5V
** MSI2-STG-10V
** MSI2-CH-5
** MSI2-CH-100
* Fixes:
** GUI: now ready for HDPI-Screens, automatic setting of scaling for better compatiblity on 4k+ Displays
** CAN-OUT: much faster response in channel list when switching to transmit, fixed possible crash when using many transmit-messages
** dmd reader: correct behaviour when reading multifile-parts
** Oxygen Net: correct behaviour when using IRIG with no DIOs enabled
** Matlab-Export: Fixed problems with export of long-term measurements
** FFT: better performance of big FFT-calculations which lead to "High math load" warning
** Highspeed: Fixed problems using fast TRION3-Modules which caused "Unable to read data" Error
* Known Limitations, general (additional to Oxygen 3.6):
** DMD-Export: May not work correctly with multifile-parts and offline calculated channels
** DMD-Export: Changes in setup will only be exported when saved before to origin file
** DMD-Export: Offline created channels will only be exported when saved before to origin file
** DMD-Export: Orange cursor in reporting pages will not be moved to exported area
Comparison Butterworth vs Bessel vs no filter in time domain
(Comp_Butterworth_vs_Bessel_vs_no_filter_in_time_domain.dmd - 9.07 MB) md5: 2146f639944fbfb37ed0e45c3398ea66
Version: 1.0 Releasedate: 12.02.2018
Language: English
Data Triggered recording level high and Alarm
(Data Triggered recording level high and Alarm.dmd - 1.16 MB) md5: 88be342aa2aec063c008c2c0b06d0c5c
Version: 1.0 Releasedate: 12.02.2018
Language: English
Data Triggered recording window in and Alarm
(Data Triggered recording window in and Alarm.dmd - 1.02 MB) md5: ede81336b2f11d08e3c9f45899073be1
* Requirements:
** Windows 10 64-Bit or Windows 7 64 Bit
** LabVIEW 2018 or newer
** LabVIEW Installation required
** LabVIEW Package Manager required
* Installation procedure
** Can be installed by using LabVIEW Package Manager
* Description
** LabVIEW Library containing all DEWETRON OXYGEN SCPI commands of v1.10 excl. data stream (DSTREAM) commands
** Can be used as reference by LabVIEW programmers for enabling a SCPI connction between OXYGEN and LabVIEW
* Known Limitations
** No data stream (DSTREAM) commands implemented
* Requirements:
** Windows 10 64-Bit or Windows 7 64 Bit
** OXYGEN SCPI over Ethernet interface v1.10 or higher (included in OXYGEN R3.6 or higher)
* Installation procedure for OXYGEN_SCPI_App_v1.0.11:
** Run installer by executing Setup.exe and follow instructions
** First installation will require some time as LAbVIEW Runtime is installed
* Description
** Can be used to test and demonstrate OXYGEN SCPI interface
*** Connect and Disconnect to SCPI host
*** Execute predefined common commands (*IDN?, *VER?, *RST, :SYST:ERR?)
*** Load dms setup file (:SETUP:LOAD)
*** Set File name (:STOR:FILE:NAME)
*** Query Channel List (:CHANNELLIST:NAMES?)
*** Edit Recording state (:STOR:START, :STOR:PAUS, :STOR:STOP)
*** Enter any SCPI command via command line
*** Numeric Measurement value transfer
**** Start and stop numeric measurement value transfer (:NUMERIC:NORMAL:ITEMS, :NUMERIC:NORMAL:VALUE?)
**** Set aggregation rate (:RATE)
**** Transfer and display data of up to 6 channels
*** ELOG data transfer
**** Select Calculation mode (:ELOG:CALCULATIONS), period time (:ELOG:PERIOD) and timestamp (:ELOG:TIMESTAMP)
**** Start and stop data transfer, Fetch data from buffer (:ELOG:ITEMS, :ELOG:START, :ELOG:STOP, :ELOG:FETCH?)
**** Transfer and display data of up to 6 channels
* Known Limitations
** Data can only be displayed in this app but is not stored to a separate file
** Other commands than stated above can only be entered via the user command line
** No direct support of data stream (DSTREAM) commands, could be entered via the user command line
* Requirements:
** Windows 10 64-Bit or Windows 7 64 Bit
** LabVIEW Installation required
* Description
** Is the LabVIEW souce code of OXYGEN SCPI App v1.0.11
** Can be used as reference by LabVIEW programmers for enabling a SCPI connction between OXYGEN and LabVIEW
* Requirements:
** Windows 10 64-Bit
** OXYGEN DataStream Plugin v1.6 or higher (OXYGEN R.5. or higher)
* Installation procedure for OXYGEN Datastream App v1.0.22:
** Run installer by executing Setup.exe and follow instructions
** First installation will require some time as LAbVIEW Runtime is installed
* Description
** Establishing a SCPI connection between LabVIEW and OXYGEN
** Querying the Channel List (:CHANNEL:NAM?)
** Specifying and querying the transferred channels (:DST:ITEMS; :DST:ITEMS?)
** Specifying and querying the data stream port (:DST:PORT xxxxx; :DST:PORT?)
** Intitalizing the data stream (:DST:INIT)
** Starting and stopping the data stream (:DST:START; :DST:STOP)
** Resetting the data stream (:DST:RES)
** Qerying the data stream state (:DST:STAT?)
** Decoding the following channel types:
*** Synchronous channel with fixed sample size
*** Synchronous channel with variable sample size
*** Asynchronous channel with fixed sample size
*** Asynchronous channel with variable sample size
* Known Limitations
** Data rates tested: 6 ch á 100 kS/s; Higher data rates may need modifications in data decoder
** Digital channels (DIO, CNT) not support by DataStream interface
DataStream VI demonstration App for OXYGEN (Source Code)
(OXYGEN DataStream App v1.0.22 Source Code.zip - 1.61 MB) md5: abc36fd8d901c5bb68980a566010738b
* Requirements:
** Windows 10 64-Bit
** LabVIEW Installation required
* Description
** Is the LabVIEW souce code of OXYGEN Datastream App v1.0.22
** Can be used as reference by LabVIEW programmers for enabling a DataStream transfer between OXYGEN and LabVIEW
* Known Limitations
** Digital channels (DIO, CNT) not support by DataStream interface
** Code adaptions for transmitting channels with sample rates higher 100 kS/s may be required
** Compatbility with LabVIEW version 2019 and higher
** See DEWETRON_Oxygen_DataStream_Plugin_v1.6.pdf
Library for OXYGEN DataStream interface (configuration and decoding)
(dewetron_lib_oxygen_datastream-1.0.22.zip - 955 KB) md5: 6adf3112ceb56a3cb5fbb2952ff88d1e
* Installation procedure
** Can be installed by using LabVIEW Package Manager
* Description
** LabVIEW Library containing DEWETRON OXYGEN data stream (DSTREAM) commands (SCPI Manual v1.20) for configuring the DataStream interface
** LabVIEW Library containing VIs for decoding data packages transmitted by the OXYGEN DataStream interface (DataStream Manual v1.6)
** Can be used as reference by LabVIEW programmers for configuring a DataStream connection between OXYGEN and LabVIEW and decoding the data in LabVIEW
* Known Limitations
** Digital channels (DIO, CNT) not support by DataStream interface
** Code adaptions for transmitting channels with sample rates higher 100 kS/s may be required
** Compatbility with LabVIEW version 2019 and higher
** See DEWETRON_Oxygen_DataStream_Plugin_v1.6.pdf